Kostenlos
Unterstützung
The Moore & Wright Spring Dividers are manufactured from polished tool steel and the points are hardened to over 550Hv. The bow spring ensures uniform tension over working range and they are fitted with a centrally mounted adjustment screw. These Spring Dividers comply with BS3123 standards. Note: The nominal size is the distance between the centre of the roller and the working ends of the legs.The Moore & Wright 504 Spring Divider has the following specifications: Size: 100mm (4in).
The Milwaukee® M12 CID Fuel™ 6.35mm (1/4in) hex Impact Driver has 2 modes to cover a number of applications. Mode 1 (0-1,200 rpm, 19Nm torque) is ideal for precision work, whereas Mode 2 (0-2,650rpm, 135Nm torque) delivers maximum performance for the toughest applications. It also has a bright LED light to illuminate the workspace. Designed to out-perform other heavy-duty power tools, it has POWERSTATE™ brushless motors for up to 10 times longer motor life. REDLINK PLUS™ intelligence, providing total system communication with overload protection to increase the tool's life. REDLITHIUM-ION™ battery packs are highly durable and feature a fuel gauge to display the remaining charge. Individual cell monitoring in the battery optimises tool run time. M12 CID-202C: 2 x 12v 2.0Ah Li-Ion Batteries. M12 CID-0: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,200/0-2,650/min. Impact Rate: 2,700/3,550/bpm. Max Torque: 19/135Nm.
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200
Bee Hive Smoker Smoke Keeper Smoker Cámara de calor de acero inoxidable Equipo de apicultura de fuelle amarillo Smoke Bee para apicultor
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 100 Bag 10
Range of Earlex Steammaster Spares.1 x Earlex PS0123 Thermostat (LMB176/275)
