Ixon Corsica, textile jacket

Caliber Audio Technology Automatikladegerät BCH8 12 V 8 A (BCH8)

Features: 7.0-in touch screen display, high definition and clear. Screen brightness is adjustable for better display. Support Max SD card storage 32GB (not included). Dual cams simultaneously recording and auto reverse parking view function. Built-in G-sensor will detect impact and trigger emergency record automatically. Multi-media, support video, audio and photo. BT hands-free function, make and receive calls directly from the mirror DVR. 3G surfing network anytime anywhere, WIFI also works well. Built-in microphone and noise canceling for microphone.

5000kpa Strong Power Car Vacuum Cleaner DC 12 Volt120WHandheld Wet/Dry Auto Portable Vacuum CleanerSpecification:Product Name: Handheld vacuum cleanerInput voltage: DC12VInput Current: 8ARated power: 120WBattery capacity: 2200MAHTrue air: 5000kpaRated speed: 6000(r/min)Size: 30x5.5x8.5cm/11.8x2.2x3.3inColor: BlackRedMaterial: ABSService Type: Daily Quick Clean-ups for Kitchen, Home, Car, Office...Optional:TypeA:With aHandbagTypeB:With noHandbagFeatures:1. 5000kpa Strong Suction120W power motor provides 5000Kpa strong suction to clean up wet material or dry debris.2. WashableRemovable HEPA FilterHEPA filter to effectively achieve dust separation and avoid secondary pollution. The vacuum filter can be taken out and can be washed with water.3. Portable Wireless Hand VacuumThis portable wireless vacuum allows you free movement from room to room, avoids the hassle of a cord. It’s lightweight and ergonomically designed which will help you escape from fatigue clean. You can pick up dust , pet hair of your CarKitchen easily and quickly.4. VersatilityWet-Dry Dual UseDurable use in wet/dry conditions, it can easily clean dust, crumbs, cat litter, pet hairs, as well as spilled milk, liquids. Equipped with 5 different types of attachments to make it clean well every areas in your home or car. No more worry about liquid and dead corners!5. One button for dust pouring, easy to clean6. 2200MAH Large Capacity BatteryPortable rechargeable design, faster charging, longer aworking time.7.

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Spannungswandler DC/AC von 12 V auf 230 V - 150 W

Type:Lampe halogène; Puissance (W):55; Température de couleur:4300K; Douille de lampe:H11; Couleur de la lumière:Blanc chaud; Matériau:Plastique,verre,Aluminium; Caractéristiques:Feux