Airoh Phantom S Evolve, flip up helmet

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

An exact replica of the Flight jacket, the Tucker features all the details found on the famous jacket worn by American pilots during World War II. Chic and understated while satisfying all the technical constraints imposed for everyday use on a motorcycle. Outer garment
Non-grainy & thick Wasko leather
Isolation
Removable thermal lining
Protection
Personal Protection Equipment approved shoulder protectors Adjustable approved elbow protectors Pocket for approved back protector
Comfort
Fixed mesh lining Collar and wrist lined with a synthetic fur Ribbed cuffs and ribbed waist Wrist tightening by means of internal adjustment 2 outer pockets Reflective material

Le Duffle Sherpa est faite de matière super dur, résistant à l’eau. Il a une poche côté clair pour éléments de facile accès, escamotable bretelles à trimballer partout et une coulissante étanche pour garder vos pièces de rechange et outils en. Il existe également des espace pour crampons boueux dans le compartiment étanche côté. Les accessoires de haute Performance qui améliorent nos conceptions sont fournis par des fournisseurs de qualité comme matières plastiques YKK, ITW Nexus et WOOJIN plastiques. La plupart des pièces sont fabriqués à partir de matériaux recyclés Zipperheads verrouillables signifie que vous pouvez verrouiller vos bagages avant de l’archiver Le compartiment de la carte vous donne un endroit pour mettre votre carte de visite, afin que votre équipement trouve son chemin du retour, si elle se perd Custom-moule curseur de fermeture-éclair est super extensible et le rendent facile à mettre et à enlever les engins peu importe ce que les conditions Bretelles détachables signifie que vous pouvez jeter sur votre sac quand vous en avez besoin et cachette sans bretelles pour éviter les enchevêtrements Dimensions : (M) : hauteur : 60 cm, largeur : 38 cm, profondeur : 38 cm, Volume : 75 l Dimensions : (L) : hauteur : 70 cm, largeur : 40 cm, profondeur : 40 cm, Volume : 90 l poids (M) : 1550g, poids (L) : 1590g

Die SCOTT Turn Pro DP Jacke mit DRYOsphere Membran ist einfach wie geschaffen für den Kampf gegen die Elemente und ist genauso robust wie bequem. Zu den Sicherheitsmerkmalen zählen Ellbogenverstärkungen, Protektoren an Ellenbogen und Schulter sowie eine High Density 500D Polyamid Konstruktion mit Hitena™-Verstärkungen. Diese Jacke ist bereit für starke Beanspruchung unter den härtesten Bedingungen. D-Sondergrößen für breitere Körper.Bequemer Kragen mit weicher Einfassung Automatisch schließender Kragen mit Magnetveschluss, mit zweiseitigem YKK FlexFix® avant Druckknopfsystem, sodass der Kragen für die gewünschte Belüftung offen oder geschlossen getragen werden kann. Temperaturkontrolle, dank Belüftungssystem an Brust, Rücken und Ärmeln Nierenwärmsystem auf der Innenseite Wasserdichtes Labyrinth-Verschlusssystem Front-Flap-Isolierung auf der Innenseite Safe-Tech Protektoren an Schultern und Ellbogen. Tasche für optionalen Rückenprotektor mit Größenhinweis Hybrid Ellbogenprotektor-Tasche für zwei Größeneinstellungen Reflektierende Elemente für perfekte Sichtbarkeit 76cm-Verbindungsreißverschluss 1 wasserdichte Taschen innen Brusttaschen 2 wasserdichte Taschen am Bund, inklusive Handwärmertaschen Verstellsystem an Kragen, Taille, Saum, Ärmeln und Bund

Feature:Product Name: Radio Stereo PanelItem Type: FasciaMaterial: PlasticColor: BlackPlacement: DashboardType: One DinDimension: 230x76mm(LxW)The Inner Measures: 183x53mmQuantity: 1pcFitment: For CITROEN C1For TOYOTA Aygo AbFor PEUGEOT 107Package Included:1 X Stereo Panel

3in1 touring jacket with large ventilation possibilities Features
450 D Polyester Air Draft Technology: mesh panels hidden below breast pocket for good ventilation AirVent ventilation zips 3M™ Scotchlite™ reflectors detachable Humax® membrane: 100 % waterpoof, 100 % windproof, breathable detachable thermo lining YF protectors on shoulder and elbow certified according to EN 1621-1:2012 elbow protectors are adjustable in height upgradable with back protector SAS-TEC SC-1/12 for sizes XS - L upgradable with back protector SAS-TEC SC-1/13 for sizes XL - 5XL 4 outer pockets, 3 inner pockets safety seams