Kostenlos
Unterstützung
Type:Pull-out / Pull-down; Style:Retro Vintage; Finish:Electroplated; Faucet Type:Kitchen faucet; Installation Type:Centerset; Valve Type:Ceramic Valve; Bodysprays Included:No; Handle Material:Brass; Batteries Included:No; Installation Holes and Handles:Single Handle One Hole; Features:Pull out; Shipping Weight:1.3; Listing Date:11/14/2023; Production mode:Self-produce
The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm
The Fisco FT10M Futura Fibreglass Long Tape has an ergonomic closed case design, featuring an integral hand grip which allows fingers to be kept clear of the winding lever when rewinding. With a highly flexible fibreglass blade that shows only metric markings. There is an additional PVC overcoating, which offers superior resistance to scuffing and marking. There is an easy winding, high impact polymer centre and an ABS belt clip moulded on to the rear of the case. Fitted with a corrosion resistant end-piece. Made in Britain.
IRWIN Vise-Grip powerful locking action with jaws long enough to reach into tight spots with small enough tips to grip tiny objects. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Incorporates a wire cutter.Visegrip Irwin 6LNC Long Nose Locking Pliers Length: 150mm (6in).Capacity: 51mm (2in).
The Facom Jet.C4M3 Jet3 4 drawer cabinet is a rugged, highly durable storage cabinet. It has three 60mm high drawers and one 130mm high drawer. 3 x 60mm high drawers (holds max. 9 modules). 1 x 130mm high drawer (holds max. 3 modules). Total load acceptable in the drawers: 85kg. Useful storage volume: 75 litres. Weight: 45kg.Overall Size: 48 x 77.4 x 54.6cm.
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
