Nut Splitters are used for removing rusted on nuts from studs etc.A spanner is used to turn the hexagon end which has the effect of forcing the chisel end into a flat of the nut, forcing apart without damage to the thread of the stud.Size 19 to 27mm
The Forge Padlock Bolts or Brenton Bolts are used to secure gates, or doors which require locking with a padlock. The Forge padlock bolt is designed for heavy-duty use with a strong steel bolt and locking collar. It comes in a variety of sizes and are either black powder coated or galvanised. Supplied with fixings for screwing into position and also bolt through fixings for additional security. Fitting Instructions: 1. Position Padlock bolt in the desired position and mark the square fixing holes with a pencil. 2. Drill holes using a Ø6mm drillbit and use the bolts provided to fasten in place. 3. Position the keep and ensure that the bolt moves freely through the hole.The FGEPBLTGAL6 Padlock Bolt has the following specifications: Bolt Length: 150mm.Finish: Galvanised.
Thor Nylon hammers have a choice of plastic grip or wooden handles with Chrome plated Zinc heads with Nylon faces, these are fitted as standard, available in 6 different weights.Alternative faces, colour coded to distinguish hardness are also available. The faces are designed to wear and are replaceable by hand. Available in 6 sizes each with different weights, Used, due to the easily interchangeable heads, as a multi purpose striking tool in most assembly applications including engineering, furniture, shopfitting, partitioning, double glazing, injection moulding dies etc. THO406 and THO408 are fitted with wooden handles while THO410, THO412, THO414 and THO416 have plastic handles.Weight 450g (1lb).Diameter 32mm (1 1/4 in).
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200
Manguera de agua expandible para jardín Mangueras de plástico flexible Tubería Lavado de autos Riego de flores Limpieza del hogar Tubería de agua de 1.5M con junta giratoria de 360 ° / Tubería de agua de 1.5M con gancho de almacenamiento de manguera (opcional)
This Faithfull Deadblow Hammer is perfect for heavy and effective blows. The specially designed head is filled with steel shot to prevent rebound and delivers dead blows for maximum impact. It is coated in PVC with a non-slip grip.1 x Faithfull Deadblow Black PVC Hammer 900g (2 lb)
Hitachi 400 Watt CN16 Shear / Nibbler for cutting aluminium plate, mild and stainless steel. The downward cutting action permits cutting of trapezoidal metal plate and minimises the scattering of chips onto the workpiece. Has a lightweight design, and slimline grip. A fast cutting speed of 1.8m/min (mild steel plate). Three position indexing die holder allows quick and easy change of cutting direction. Standard Accessories: die, punch, and 2 wrenches. Specification Input Power: 400 Watt.No-load Speed: 2,300/min.Cutting: Mild Steel: 1.6mm, Stainless Steel: 1.2mm, Aluminium Plate: 2.3mm.Min Cutting Radius: 40mm.Weight: 1.7kg.
