Kostenlos
Unterstützung
The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18 Volt DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18 Volt DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18 Volt DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18 Volt DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18 Volt DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18 Volt DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries. Supplied with 3 x 18 Volt 5.0Ah Li-Ion Batteries and 2 x DS300 Tough System Kit Boxes.
Bahco Combination Pliers used for both holding and cutting. The jaws are slimmer than standard products, have smoothly rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 38mm.Cutting ;Capacity: ;Piano: ;1.4mm, Hard: ;2.0mm.Weight: 252g.
This Teng Tools Aluminium Clip Rail is ideal for mounting on a wall or for use in a toolbox, to conveniently store Teng sockets. It is suitable for use with clips for 1/4 inch, 3/8 inch and 1/2 inch sockets, which clip onto the single track rail and which hold the socket in place. Clips NOT included.The TENALU430 Section Rail has the following length: 1 metre.
Powdered chalk for refilling chalk line reels.Food Grade Calcium Carbonate Chalk, colour fast and resistant to damp conditions. The twist lock cap on the container makes it easy to use.Colour Red: For exterior masonry work,/indeliable in use.Size. 2.5lb/1Kg
The Faithfull Brass Ball Chain Kit is ideal for use with basin, sink and bath chains. Supplied with fittings. Chain length: 1 metre.Finish: Polished brass.
These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M8 Bag 100