These Faithfull Hexagon Sockets are professional, high quality 3/8in drive metric sockets forged from chrome vanadium steel, which is hardened, tempered and satin chrome plated for corrosion protection. Faithfull sockets have a hexagon design that gives an accurate fit on both nuts and bolts and the chamfered end allows easy nut location and entry.The FAISOC3823 Hexagon Socket has the following specifications: Drive: 3/8 inch square. Size: 23mm Hexagon.
The DEWALT DCK206M2 Twin Pack, contains the following: 1 x 18 Volt DCH253 3 Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18 Volt Lithium Ion batteries to deliver high performance, long life and maximum runtime. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18 Volt DCD785 XR Compact Hammer Drill Driver has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life. Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm 1 x 10.8-18 Volt DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LEDindicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-Ion DEWALT Slide Pack 10.8, 14.4, and 18 Volt batteries.
The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21º with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.
Knipex 77 Series electronic diagonal cutter with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 57 HRC. Cutting Capacity: 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm. 77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.
Nut Splitters are used for removing rusted on nuts from studs etc.A spanner is used to turn the hexagon end which has the effect of forcing the chisel end into a flat of the nut, forcing apart without damage to the thread of the stud.Size 19 to 27mm
