A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)
The Bostitch 21684B-E wide crown stapler is a professional grade headless pinner with a small compact design for better access to the workspace, variable power control and a secondary safety trigger. Suitable for furniture manufacture, ideal for moulding and trim work. Weight 0.83 kg Dimensions: Length 221 mm × Width 150 mm × Height 40 mm Staple Length 4 mm (min) - 16 mm (max) Diameter 0.5 mm (min) - 1 mm (max) Magazine Capacity 125 (max) Operating Pressure PSI 80 - 120 BAR 4.9 - 8.4 Air Consumption Ltr.per shot @ 5.6 bar 0.17 Noise LPA 1sd 64.4 LWA 1sd 74.0 LPA 1s, 1m 61.0 Vibration m/s2
The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.2 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 760mm (30in).Strap Width: 30mm (1.1/8in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.
The Bahco LTS-30-E Open Reel Fibreglass Tape has a nylon coated fiberglass blade that shows both metric and imperial graduations. The blade can withstand pulling force of around 500kg. Debris can be easily washed from the blade.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3125 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 5.
