Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 8.5Adjustment . 184 - 216mmAdjustment. 7.1/4 - 8.1/2in
The Metabo TKHS 315 M Site Saw is a precise, powerful table saw in professional configuration that quickly adapts to every application. It is fitted with a quiet induction motor that has a maintenance-free, robust design with a motor brake and overload protection. It also has restart protection that prevents unintentional start-up after power supply interruption, for compelte ease of mind. There is a sturdy parallel guide/ripping fence with quick fastening combined with a mitre fence that has a linear stop, so it can also be used a sliding table. The saw blade heigh is freely aadjustable and the saw blade inclination ca be adjusted from the front. It has a sturdy, powder-coated sheet steel design with a galvanised table-top and foldable table length extension. The frame and motor are supplied pre-mounted. Ideal for sawing squared timber, boards, panels and wood-like materials in the workshop and at construction sites. Supplied with: 1 x 300mm 24 Tooth Carbide Saw Blade, 1 x Mitre Fence, 1 x 600 x 800mm Table Extension, 1 x Chip & Dust Extraction Unit, 1 x Push Stick, 1 x Wheel & Handle Set and 1 x Parallel Guide/Rip Fence. Specification Input Power: 3,100 Watt.No Load Speed: 2,990/min.Table Size: 800 x 600mm.Blade Diameter: 315 x 30mm bore, 24 tooth TCT.Bevel Capacity: 0-45°.Cutting Height: 0-85mm.Cutting Width: Parallel Guide/Rip Fence: 340mm, Mitre Fence: 250mm.Dimensions: 1700 x 700 x 1000mm.Weight: 75kg.The Metabo TKHS 315 M Site Saw 110 Volt Version.
IRWIN Vise-Grip powerful locking action with jaws long enough to reach into tight spots with small enough tips to grip tiny objects. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Incorporates a wire cutter.Visegrip Irwin 9LNC Long Nose Locking Pliers Length: 225mm (9in).Capacity: 73mm (3in).
Janitol Florafresh is a fragrant disinfectant cleaner, specially formulated to clean and disinfect toilets, urinals, floors, walls, wash basins, shower cubicles and refuse areas. Removes the cause of malodours and is suitable for use with cloth, mop, hand sprayer or pressure washers.
The D21580K is equipped with a 1705 watt motor that produces a maximum drilling capacity of 152mm. This powerful drill makes drilling jobs quick and easy. The power tool has large and comfortable side handle for enhanced user comfort and a large rear handle enabling the user to work with while wearing gloves. The DeWalt Diamond drill has a mechanical clutch for added user protection and a lock on button for continuous operation whilst drilling with a stand.This diamond drill is prefect for electrical, plumbing or HVAC applications.
Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5
