Motorcycle Rear Foot Brake Master Pump Cylinder With Fluid Reservoir Universal

Specification:Color:BlackMaterial:ABSProduct Name:Car Grille Hood TrimPlacement on vehicle:Car Grille HoodSize:134cm/52.76in x 17cm/6.69in (L x W)Features:-Easy Installation, Direct Fit.-Improve the appearance of the car.Fits:For Mazda CX-5 CX5 2017 2018 2019(The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing!)Installation:1.Press hard once and finish.2.Tear off the double-sided tape.3.Clean the body with a towel to ensure that there is no water,oil,debris,etc.Package included:1 x Car Grille Hood TrimNote:1.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)2.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.3.There are no instruction included!Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.

Multi-dimensional functionality for life on the road. Supple sheepskin leather conforms for comfort, integrated plastic knuckle armor for those nasty encounters with the asphalt, and now a Touchtec leather palm to use your touchscreen devices without removal of the glove.
Convenience, Comfort, Crash-worthiness: the Icon PURSUIT TOUCH Glove has just leveled up.
Features:
ToucTec™ Leather Palm Allows You To Use Your Touchscreen Device With Your Gloves On Pittards® Sheepskin Backhand For Great Fit Integrated Knuckle Armor Secure Wrist Closure Keeps The Glove In Place Expansion Gussets To Improve Overall Flexibility Colorway is Goatskin With TouchTech Palm

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

IXS Grimstad, leather pant waterproof

MATERIALGewachste Cordura 500 w / a Hand gefertigte Behandlung Miporex Membran Baumwolle / Viskose-Twill-Futter abnehmbare weiche Protektoren an den Knien und Hüften innere Struktur: Herausnehmbares Steppfutter SCHUTZProtektoren mit der EU-Richtlinie 89/686 / EWG und der technische Norm EN 1621-1: 2012 TASCHENZwei Fronttaschen classic FEATURESVersiegelte Nähte Membran Wasserdichter Reissverschluß Reflex-Paspel am Unterschenkel GRÖSSEN: 44-46-48-50-52-54-56-58

Features
Contains non-textile parts of animal origin solto-TEX membrane 100% polyurethane laminated Pants made of 600D polyester solto-TEX 3-layer Z-liner membrane Polyester mesh lining with water barrier Removable thermal lining Taillenversteller Anti-slip trim on the buttocks Comfort stretch inserts at the back of the knees 2 outside pockets Reflective transfer prints Long connection zipper Height-adjustable knee protectors YF (men: 603) Bag for hip protector (optional retrofittable with X99522-HIP-10)