Dainese Bora Air Tex Motorcycle Textile Jacket, black-blue-yellow, Size 58, black-blue-yellow, Size 58

From urban street crowd straight into high-speed curve paradise, and with the the same helmet? No problem for the brand new exo-300air! with few simple steps can be all-rounders of the open face helmet into a full-City Face Helmet rebuild. The exo-300air the additional advantages of its high top comfort and fit. Airfit Concept Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! Kwikwick2® inner lining LINER:Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head. Features
Advanced Polycarbonate Composite Engineered Shell: Quiet, aero-tuned design for wind-tunnel tested comfort. EPS-lined chin bar for additional protection. Ventilation system: Adjustable, indexed front and rear vents with aero-tuned rear spoiler reduce lift, create vacuum and maximize airflow through helmet. 5 available sizes from the XS to the XL Micrometric Automatic chinstrap buckle for quick release and precise adjustment. Certified as Open Face and Full Face helmet! This helmet comes standard with a clear visor.

The F5 is the ultimate all-day helmet. Designed 100% from the ground up, only the best designs, years of rider feedback, testing data and cutting-edge technologies are integrated into this revolutionary lid. Combining extremely low weight, intuitive venting, and next-gen safety features, KLIM has engineered the F5 to provide the best possible riding experience in the most demanding environments, all day. Features
Full Klim® Karbon fiber shell One of the lightest helmets in the industry Extra large eye port for maximum field of vision Dual density eps Wind tunnel tested Fid-Lock® strap closures (extremely easy to take helmet on and off) ventilation Most ventilated helmet in the industry 18 intakes and 8 exhaust vents Direct vent eps design Designed to intake air at speed / exhaust heat while at low speeds or stopped safety Shell structure designed for maximum strength while remaining lightweight Neck brace compatible Exceeds ECE certifications comfort Focus on fit Anti-microbial and antibacterial materials Moisture-wicking Drylex® comfort liner 3 shell sizes and 3 eps sizes for the best fit and maximum comfort to fit your head like a glove Helmet bag Breath box Windstopper® liner Extra peak visor/hardware

Protection
certified under norm EN 13594:2015 "protected glove for motorcyclists" Aramide protection on back of hand hard plastic knuckle protection knuckle protection tested (impact test for knuckle protection) ball of thumb reinforced with SuperFabric®-brand material
Fit/features
visor wiper special flat seam elasticated leather panels on back, thumb & fingers velcro adjustment at wrists & cuffs
Lining
unlined
Outer shell
highly abrasion-resistant kangaroo leather palm goat skin upper colourfast & sweat-proof

Outer shell
400D Polyamide (100% polyamide)
Lining
3D air mesh panels (100% polyester) in back to promote air circulation mesh lining (100% polyester)
Fit/features
2 external pockets 1 inner pocket internal cellphone pocket air-vent zippers front air-vent zipper stretch panels at shoulders & elbows stretch panels on inner arms arm adjustment hip adjustment soft collar
Protection
EN 1621-1 CE-certified soft protectors at shoulders & elbows optional EN 1621-2 back protector reflective sections Connecting zip

Specification:Color: BlackMaterial: RubberDiameter: Approx. 58mm/ 2.28Number of Blades: 6Fitment:Compatible with: For Yamaha outboard motor part 688-44352-03This part suits the following engines:For Yamaha 2 stroke outboard motorsC75 HP (1994-1999)E75 HP (1995-2000)70B (2004 on)75A75CP75 HP (1996-1999)C80 HP (1997)80A85 HP (1985)C85 HP (1989-1997)Package Included:1 X Water Pump Impeller

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr