Marshalltown MPB14SSD Pre Worn Stainless Steel Plasterers Trowel 14in

The Stabila BST-K Construction Tripods have a removable head that allows quick and easy mounting of the laser, simply remove and head and attach onto your laser before fastening the head onto the tripod. The lifting system with crank handle allows the height of the laser to be raised and locked off at a range of heights. The built-in air cushion lifting system allows the central column to descend gently, even if the user forgets to lock off the tripod. This prevents accidental damage to the laser. Each leg of the tripod can be adjusted individually and each spiked foot has rotatable rubber shoes, for scratch-free use indoors. Also fitted with a high quality chain spread stopper.The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.

Juego de extractor de tubo manual de herramienta de abocinado universal de 5-19 mm para herramientas de refrigeración de cono excéntrico de ángulo de cobre y latón de 3/16 a 3/4 pulgadas

The Stanley Waterpump Pliers that are generally used by plumbers for holding and gripping fittings such as compression joints. These are heat treated carbon steel forged pliers, with ground heat treated jaws that produce longer life, durability and accuracy when gripping. The Comfort Grip handles give more control when in use. With a polished head for precision appearance. Ideal for plumbing fitting with serrated jaws to grip around objects.1 x Stanley Waterpump Pliers 250mm - 45mm Capacity

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Hammer fixings are for fast fixing with minimal screwdriver work. Quicker to use than standard plugs. For fixing stud battens to walls before cladding. Although hammered in, they can be un-screwed.Size. 5 x 50mm. Card of 10.Fixture Thickness 25mm.

Disston Screwdiggers fulfil the same function as Screwsinks but the countersinking part can be slid up and down the drill part of the tool.Ideal for drilling, countersinking and counterboring in one operation.This means that a No.8 Screwdigger can be adjusted to predrill for different lengths of No. 8 Screw.Uses 7/64in Drill Bit.To ensure an acurate fit we suggest you use the same Plug Cutter from the Disston brand.For No 8 screw