Filamento PLA 1.75MM Filamentos de impresión 3D para impresora 3D 1 KG 1 carrete

The Stanley medium pile Silver Stripe roller sleeve is ideal for use with emulsion and water-based paints. It has a long life, and provides an excellent all-round performance, coverage and finish. It is made from woven polyacrylic fabric and is suitable for smooth and semi-rough surfaces. Size: 230mm (9in).Pile height: 12mm.Diameter: 44mm (1.3/4in).

This Facom 4 piece plier set comprises the following: Locking multi-grip pliers (181A.25CPE).Diagonal cutters (192.16CPE).Half-round nose pliers (185.20CPE).Combination pliers (187.18CPE).

The ALM Manufacturing FL247 Shredding Lines are suitable for: Flymo: Garden Vac, Garden Vac Plus, 1500/1600/1600X/1800/2200/2500, Turbo, 750 Plus, MEV750-2. Compares to FLY024. Pack of 5.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen, and protects up to 8 years. Two coats are required. Specification: Colour : Black Finish : Hammered Size : 2.5L Coverage : 5m²/L

These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners.The sockets are available in a range of metric sizes.Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS15 socket has the following specifications:Socket size: 15.0mm.Length: 36mm.Weight: 60g.

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 in). Blade length (B): 16mm (0.63 in). Head width (C): 16mm (0.63 in). Head depth (D): 8mm (0.31 in). Tip width: (F): 1.6mm (0.06 in). Cutting capacity: 0.4-2.0mm. Cutting edge: Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.