Kostenlos
Unterstützung
The Fisco FT10M Futura Fibreglass Long Tape has an ergonomic closed case design, featuring an integral hand grip which allows fingers to be kept clear of the winding lever when rewinding. With a highly flexible fibreglass blade that shows only metric markings. There is an additional PVC overcoating, which offers superior resistance to scuffing and marking. There is an easy winding, high impact polymer centre and an ABS belt clip moulded on to the rear of the case. Fitted with a corrosion resistant end-piece. Made in Britain.
The ABUS 65 Series long shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.Shackle produced from hardened steel. Precision pin tumbler cylinder. The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 40 mmOverall height: 103 mmOverall depth: 15 mm Shackle width: 22 mm I.D.Shackle height: 63 mmShackle Dia: 6 mm
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : Red Finish : Smooth Size : 400ml Coverage : 0.5m²/L
These Forgefix Masonry Anchor Projection Bolts have a Zinc Yellow Passivated finish for increased durability and resistance to corrosion. They have a tough and reliable construction to cover most heavy-duty fixing applications. The four-way expansion shield offers extremely strong and secure anchorage, and the specially manufactured retaining spring ensures encapsulation of the wedge during expansion. Projection bolts offer easier fixture removal or repositioning due to the bolt remaining in the shield. APPLICATION:Ideal for securing reinforcement wall plates, lighting supports, guy ropes and bracketry.Ensure the correct socket drive or spanner is used to ensure accurate installation. When sizing a Masonry Anchors it is most important to know the depth of the material that you are fixing.Eg: Size M610: The 'M6' is the thread size of the bolt. The '10' denotes the maximum thickness of material it will fix. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Masonry Anchor Bolt Projecting Zinc Yellow Passivated M8 x 40 Bag 10
Featuring REDLINK overload protection electronics in the tool and battery pack to deliver best in class system durability, this tool is a compact 3/8inch impact wrench that measures 152mm in length to make it perfect for working within confined spaces. Designed with the flexible battery system that works with all Milwaukee M18 batteries, REDLITHIUM-ION batteries gives up to two times more run time, 20% more power and two times more battery life. The battery also operates better at -20°C, than any other lithium-ion batteries.The individual cell monitoring optimises tool run time to ensure long term durability, whilst the heavy-duty full metal gearbox and gears provide superior durability and maximum torque.With 3/8 inch square drive to allow for use with universal sockets, this tool also has an on board fuel gauge and a LED light, whilst its individual cell monitoring optimises tool run time to ensure long term durability.
These Zarges Aluminium Loft Ladder, two and three section aluminium loft ladders are available. With D shaped rungs for maximum comfort, and a universal stowing pole. The three section model comes with a hand rail. Easy to assemble and fit and supplied with instructions. Conforms to EN 14975 standards, 150 Kilo rating.No of sections: 3.Floor to floor height: 2,133 - 3,000mm.Floor opening size: 381 x 400 - 463mm.Minimum loft clearance arc: 710mm.Minimum storage length: 1,120mm.