15 unids / set 6mm-50mm Diamond Coated Hole Saw Taladro Bit Cutter Core Shaft Tool Kit para cerámica de vidrio de porcelana de mármol 6/8/10/12/14/16/18/20/22/25/26/28/30/40 / 50 mm

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 5 years. Specification: Colour : White Finish : Smooth Size : 400ml Coverage : 0.5m²/L

16 gauge finish nails, which are compatible with: Tacwise Air Powered Nailers: DFN50, DFN50WHH and FFN64LHH.Tacwise Battery Powered Nailers: Ranger 2 16G Nailer.And all other nailers that take 16g straight finish nails.

Herramienta de torneado de madera de torno de acero de aleación Herramienta de corte de llave de carburo Herramientas de cortador de aleación de aluminio

The Knipex 74 91 Series high leverage centre cutters with dipped PVC handles and centric precision cutting edges with an integrated forged joint axle for heavy-duty use. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Like most of the Knipex range, these cutters are oil hardened and tempered for longer life, with cutting edges separately induction-hardened to approx. 64hrc. They are made from top quality high grade Chrome Vanadium tool steel with polished hardened heads. Specification Cutting Capacity: Piano: 3.5mm, Hard: 3.8mm, Medium: 5.0mm.Length: 250mm (10in).

DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3125 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 5.

The Bosch Construct Timber Saw Blades are designed for Construction Site Timber which might include concrete residues or nails within the timber. Technical Specification: Blade Diameter : 190mm No. of Teeth : 12 Bore Size : 30mm Tooth Pitch : 2.6mm Tooth Shape : 12° POS Rake Max Rotation Speed : 8,000RPM