Used in combination with screwsinks to prepare perfectly sized plugs to fill counterbored holes. For best performance power drill should be held in a stand. For a perfect grain match use an offcut from the timber being plugged. To ensure an acurate fit we suggest you use the same screwsink from the Faithfull brand. The set of 4 contains sizes No 6, 8, 10 and 12.Cuts Size 10 Plugs (10mm)
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/12 Steel Wrecking Bar 300mm (12in)
Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 75mm.Pack quantity: 100.
This Surform® will plane all types of wood, aluminium, copper, plastic and laminates.It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade.Overall length 315mm (12in).
The Norbar Adjustable Industrial Torque Wrenches have a robust construction, which gives accurate results to ±4%, even in arduous working conditions. Their large break angle improves accuracy by reducing the possibility of over torqueing and the cam control of the mechanism gives a controlled break which will not throw the operator off balance. The torque wrenches are dual scaled, with both N.m (Newton Meters) and lbf.ft graduations. Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017 and carry case for storage and protection. 3AR Industrial Torque Wrench Specification Drive: 3/4in Square.Range: 100 – 500Nm (70 – 350 lbf.ft).Torque Radius: 683.4mm.Ratchet Teeth: 36.Ratchet Type: Push-Through.Length: 910mm.Weight: 5.2kg.
Record Irwin V150B Woodcraft Vice is lighter in construction than the standard woodworking vices, this useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High quality cast body fitted with carefully aligned steel slide bars and main screw. Jaw Width. 150mm (6in).Jaw Opening: 115mm (4 1/2in).
A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 24 x 27mm.Length 263mm
