5 en 1 Pro Stitching Groover y arrugando el borde biselado, juegos de bricolaje de cuero y cuero, madera y acero Herramienta de mano

The Wera BiTorsion Extra Hard (BTH) bits significantly extend service life. Ideal for use with screws into general construction materials and timbers. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life. Use with all combi and drill drivers. For impact tools, use Impaktor bits.Card of 2 Wera 855/1 BTH BiTorsion Pozidriv PZ2 Insert Bit Extra Hard 25mm

Monument Plastic Pipe Cutter effective on PVC, polybutylene, MDP, polyethylene, HEP20®, plastic overflow pipe, plastic electrical conduit, supertube, mini trunking, rubber hose, pneumatic pipe and electrical sleeving. Simply place the cutter over the pipe to be cut and gently twist while you depress the handles to get a good clean cut.Monument Plastic Pipe Cutter. Maximum Pipe Size: 60mm.

Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted with a comfortable handle. Supplied in a blister pack.FAIFIC732 Chainsaw File has the following specifications:Cut: Single Cut. Blade Length: 200mm (8in). Blade Width: 5.5mm (7/32in).

These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200

The DEWALT DWS520KT Heavy-Duty Plunge Saw has full wave electronics that maintain a constant speed under heavy load and the variable speed allows you to select the correct speed depending on the material you are cutting. The anti kickback function stops the saw from moving backwards along the rails and helps stop the saw from climbing out of the work piece when making plunge cuts. The parallel plunge allows the user to maintain a smooth and constant hand position while cutting and the included 48 tooth blade gives a fine and accurate finish with very little breakout in laminates. The rail adjustment allows the saw to be adjusted accurately to the rails and it has a 55mm depth of cut that allows the trimming and sizing of most common door sizes. The enclosed guard gives a 90% dust extraction capability. Specification: Input Power: 1,300 Watt.No Load Speed: 1,750-4,000/min.Blade: 165 x 20mm Bore.Bevel Capacity: 47°.Depth of Cut: @90º: 59mm, @45º: 44mm.Depth of Cut With Guide Rails: @90º: 55mm, @45º: 40mm.Length: 303mm.Height: 265mm.Weight: 5.1kg. The DEWALT DWS520KT Heavy-Duty Plunge Saw 1300 Watt 240 Volt Version.

Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applcations such a engraving, grooving, rebating and shallow morticing. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken.Shank: 1/4in.D - Diameter - 15/64in 6.0mmC - Cutting Length - 5/8in 16mmT.C.T. 2 Flutes.