Kostenlos
Unterstützung
These Forgefix Phillips, Single Coarse Thread (SCT) Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface. They are supplied collated, with 50 screws per strip and 1,000 screws per box. APPLICATION:Designed for fitting dry lining to studding. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Drywall Collated Screw Phillips Bugle Head SCT 3.99 x 35mm Box 1000
The ALM Manufacturing QT039 Drive Belt fits: Qualcast: Turbotrak 35. Compares to: L57302, FO16-L57302.
The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)
The Plantpak by Crest Windowsill Heated Propagator is a premium quality electric 3 bay propagator, which is durable and robust. It comprises 3 pots and a water reservoir. The pots each have shatterproof covers and adjustable ventilation for air flow and humidity. The 1.4 Litre water reservoir removes the need for daily watering. The propagator is ideal for the beginner and experienced gardener. It is designed to provide an even heat distribution of 16-19°C. Supplied with 6 varieties of Unwins Seeds. Voltage: 230 Volt.Cable Length: 2m (Cable Included).Dimensions: 54.5 x 22 x 16.5cm.
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L
These Forgefix Spring Lock Washers ring-shaped, split at one point and bent into a helix. This shape means that the washer exerts a spring force between the fastener's head and the base item. The main purpose of the Spring Washer is to prevent loosening of the fastener by either movement or vibration.These washers are bright zinc plated for increased corrosion resistance. APPLICATIONIdeal for all manner of bolting applications where movement or vibration may cause loosening. Typical examples would be engineering and machinery.Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Spring Washers ZP M10 Bag 100