Held Slade, leather suit 1pcs.

Description:1. Direct replacement to your original2. Plug-and-play, direct fit, easy installation3. Improved heat sink and charging capabilities4. Higher grade of electric components.Specification:Product Name: Voltage RegulatorMaterial: MetalPlasticColor: BlackWidth : 10cmLength : 11cmHeight : 5cmFixation holes center to center : 8.2cmWires Length: 61cm144cmNumber of plugs : 3Number of pins : 3Number of wires: 5Minimum Charging Voltage: 14.5 V +/- 0.5 VMaximum Charging Current: 50 A / 500 WOpen Circuit Voltage: 15 VOperation Temperature: -20℃ to 85℃Fitment:For Polaris Hawkeye 325 -- 2015For Polaris Scrambler 1000 XP -- 2014-2016For Polaris Scrambler 1000 XP Euro -- 2015For Polaris Scrambler 850 -- 2014-2016For Polaris Scrambler 850 Euro -- 2014-2015For Polaris Sportsman 1000 XP -- 2015-2016For Polaris Sportsman 325 ETX -- 2015For Polaris Sportsman 450 HO -- 2016-2018For Polaris Sportsman 550 -- 2010-2014For Polaris Sportsman 550 Forest -- 2011-2014For Polaris Sportsman 550 Touring -- 2011-2014For Polaris Sportsman 550 XP -- 2014For Polaris Sportsman 570 -- 2014-2018For Polaris Sportsman 570 Touring -- 2014-2018For Polaris Sportsman 850 -- 2015-2016For Polaris Sportsman 850 Forest -- 2012-2014For Polaris Sportsman 850 High Lifter -- 2016For Polaris Sportsman 850 Touring SP -- 2015For Polaris Sportsman 850 XP -- 2010-2014For Polaris Sportsman 850 XP EPS INTL -- 2010, 2012-2015For Polaris Sportsman X2 550 -- 2011-2014For Polaris Sportsman X2 570 -- 2015-2018For Polaris Spor

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Features Optimal fit and comfort The X.G200 is available in 2 shell sizes for optimal comfort and fit. Visor position 2 different setting positions for the helmet shield off-road capability With a super-strong and lightweight shell, with carbon fiber reinforcement in the chin area. ventilation The huge amount of ventilation slots in the chin guard and the 2 ventilation slots below the helmet shield ensure that the inside of the helmet remains fresh and comfortable. The soft, luxurious lining The masterfully designed interior is stylish and simple at the same time and represents the pinnacle of X.G10 comfort. The X-Mart Dry technology provides a soft feel and a sophisticated cooling system with a drying rate that is twice as fast as normal cotton and one provides additional insulation on cold days. All interior parts are completely removable and washable, antiperspirant and anti-allergic. Double D-ring The entire X.Garage collection comes with the simple and reliable double D-ring locking system.

Squared motorcycle glove is the result of a careful study of the needs of the cafe racer s and scrambler s riders. Made with a blend of neoprene, microfiber and high-strength fabrics, offers the protection of the Warrior technology on the palm.
Technical features:
High strength outer fabric Neoprene inserts Microfiber details on the palm EVA protections on the knuckles Warrior technology protection on the palm Side reinforcements Product Weight: kg. 0,13

White Motorcycle Luggage Hooks Aluminum ScooterDescription:100% brand new and high qualityColor : WhiteUsually installed underneath the front of the motorcycle,Just hit the shell small eyes, on the opposite side can be fixed with a screw cap,Package included:2 X WhiteMotorcycle Luggage hook

Features
waterproof, windproof and breatheable through climate membran removeable thermal lining width-adjustable through Velcro fastener at the hip and leg end elastic comfort inserts on the knee and butt ergonomically adjusted cut connection zipper Anti-slip material on the posterior 4 pockets including 2 waterproof Cargo-Pockets on the thighs height adjustable- and removeable protectors on the knee SAS-TEC protectors retrofitted on hips safety saems in accordance with ISO 4916 heavy duty 450 D polyester fabric combined with a climate membrane breathable net inner lining