Socket Tray Herramienta de almacenamiento de garaje multifuncional Soporte para rack Organizador de plásticos para el hogar Accesorios Soporte de estante Reparación del hogar

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted with a comfortable handle. Supplied in a blister pack.FAIFIC732 Chainsaw File has the following specifications:Cut: Single Cut. Blade Length: 200mm (8in). Blade Width: 5.5mm (7/32in).

Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 75mm.Pack quantity: 100.

The Henry Squire Leopard Range offers a finely shaped solid brass case to give a slimmer profile. Pin tumbler mechanism and stainless steel springs. Good general security locks for internal and external use. Hardened steel shackles on padlocks 25-60mm. Keyed alike 20-60mm available to order.

The Stanley FatMax Hi Output Professional Glue Gun 200 Watt 240 Volt with fast warm up which means it is ready to use in just 60 seconds. Its ceramic element heats up quicker and holds heat longer with a 1133g per hour output. The standby mode takes 30 seconds to get back to working temperature. The hibernate mode stores heating after 30 minutes of non-use. The gun has a dual colour LED, red when below 170° and green when ready to use. Supplied with: 6 x 12mm General Purpose Glue Sticks.6 x 12mm Formula II Super Strength Glue Sticks.6 x 12mm Dual Temperature Glue Sticks. Specification Input Power: 200 Watt. (135°-210°).Heating Time: 1 Minute.Glue Output: 1133gr/hour.Glue Sticks: 12mm Dual Temp.

R.S.T. gauging trowel with a carbon steel blade and soft-grip handle. Used primarily for mixing and applying small quantities of cement. Size: 180mm (7in).