Two flute straight cutters produce a cleaner finish than the single flute cutters and are suitable for grooving, rebating, morticing and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes give a clean finish to cut edges. 1/4in Shank.C = 25 mmD = 20 mm 25/32in
The ABUS 65 Series open shackle brass padlocks have a body which is made from solid brass, hardened steel shackle up to 30mm and hardened steel alloy shackle 40mm and above. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key.The cylinder can be re-keyed to match an existing key (Keyed Alike). Overall width: 20 mmOverall height: 34 mmOverall depth: 10 mm Shackle width: 9.5 mm I.D.Shackle height: 11.5 mmShackle Dia: 3.5 mm
The Faithfull PDRAUG25 is an easy to use drum auger that is designed to remove blockages from household pipes and drains when plungers and chemicals fail to work. The auger utilises a 7.6m/25ft x 6mm/1/4in flexible spring steel shaft with a barrel end that can be rotated to clear away blockages and is easily retracted into its case after use for safe storage. The auger has a sturdy plastic body manufactured from PE and ABS wipe clean plastic and features both an integral winding and pistol grip handle that help make the auger easy to use. Once fully retracted the spring steel shaft can be locked in place using the locking thumb screw. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.
Ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.The Bessey UK30 Uniklamp has the following specification: Clamping Force: up to 1,500N.Opening 600mm.Throat Depth: 80mm.Rail: 20 x 5mm.Weight: 0.93kg.
