Kostenlos
Unterstützung
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety SHELL in TRICARBOCO material, mix of Kevlar, carbon and fiber, joint through resine, hand made, using new technologies with vinilester resin. The INTERNAL POLYSTYRENE produced in 3 sizes to get the best fitting. This characteristic allows a gradual and progressive absorption of the energy produced by the impact. Even if the bigger part of the energy created by the impact is absorbed by the external shell, thanks to its deformation, the role of polystyrene is determinant for the absorption of the residual energy. A diversified density of the polystyrene, permit us to optimize the mechanical performance of the shell/polystyrene. The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Ventilation The internal polystyrene has been studied to work together wityh the air ventilations, put on the shell. The channels allow the perfect inside air flow and at the same time a quick outside air flow from back ventilation. Comfort The CHEEK PADS and the INTERNAL COMFORT shell can be removed, washed and replaced.
They are made of a precious fabric with specific fibers, that offer:
It moves away the body sweat, Keeps rider fresh, dry and completely comfortable, Lightweight, soft and breathable fabric, Performance controlled and certified by ADVANSA.
The cheek pads are easily removable also in case of accident through a red strap which removes the cheek pad even if the helmet is worn by the rider.
2018 New Colorful Striped Swim Shorts Men's Quick-Dry Swimwear Summer Beach Pants Surf Board Shorts Plus Size M-3XL
Lebe Deine Leidenschaft. Lebe Arsenal in diesem offiziell lizensierten Heimtrikot für die Saison 2018/19. Auch das Puma AFC Replica Home Trikot 2018/2019 kommt dieses Jahr im klassischen Chili-Pepper-Rot, jedoch in einem neuen melierten Look und mit zusätzlichen roten Mikrostreifen auf den weiß grundierten Ärmeln, um neue Performance-Akzente setzen. Abgerundet wird das Trikot durch das neue und einzigartige Kragendesign sowie durch eine Frontgrafik, für die sich die Designer von den Heimspielen der Gunners im Emirates Stadium haben inspirieren lassen.Nur begrenzte Stückzahlen verfügbar. Abgabe nur in handelsüblichen Mengen!Größenauswahl-Hilfe: Model mit 190 cm Größe und 90 kg Gewicht trägt Größe LGrößenauswahl-Hilfe: Model mit 180 cm Größe und 74 kg Gewicht trägt Größe MGrößenauswahl-Hilfe: Model mit 173 cm Größe und 60 kg Gewicht trägt Größe SEigenschaften: Material: 100% Polyester, Pique, 145 g/m², Finish: Bio-Based Wicking Finish, Print: Sublimation PrintPassform - Fit: Locker geschnitten Größenflag: Fällt normal aus Pflegehinweise: Maschinenwäsche, keinen Weichspüler verwenden Puma ist ´Offizieller Partner des FC Arsenal´ - Hologramm-Label im Lieferumfang enthaltenPuma dryCELL-Technologie transportiert die Feuchtigkeit vom Körper weg und hält während des Spiels angenehm trocken Feuchtigkeitsabtransport auf biologischer BasisDynamischer Schnitt und ergonomische Passform Arsenal Wappen-Aufnäher auf der linken Brustseite Fly Emirates Sponsoren-Aufdruck auf der Vorderseite Authentic Licensed Product Label mit Nummerierung auf der Vorderseite rechts unten aufgedrucktGesticktes Cat Logo auf der rechten Brust und an beiden Oberarmen cellDRY-Logo vorn links unten aufgedruckt
Handlebar Stem-S-Type-Matt-Racing Green (BS226)
FISCHER Universal Fahrrad-Kettenschutz, schwarz-transparent Material: Kunststoff, für Sport- und Tourenräder, 66,00cm (26"") bis - 1 Stück (85948)
Full-grain oil-treated leather upper and âHigh-Texâ membrane. Contoured P.U. moulded shin plate. âD3Oâ material ankle cups. Micro-adjustable buckles closure. Leather heat-shield.