Kostenlos
Unterstützung
The Faithfull traditional lead dresser manufactured from straight grain seasoned Beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials. Weight: 375g.Face Dimensions: 50 x 170mm (2 x 6.3/4 in).
This Surform® will plane all types of wood, aluminium, copper, plastic and laminates.It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade.Overall length 315mm (12in).
The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Heavy-Duty Screw Feed No.30 Tubing and Conduit Cutter Capacity: 25-79mm (1 - 3.1/8in).Std. Wheel: E-1240.Weight: 1.60kg.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required. APPLICATIONWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.Ensure the correct Pozi drive insert bit is used to release fixture and fitting if required.Hammer Fixing & Plug M10 x 135 Bag 10
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact sockets have a 1/2 inch square drive. They are manufactured to the latest DIN standard for industrial use.The TEN920617 Impact Socket has the following specifications:Size: 17mm. Length: 78mm.