Visegrip Curved Jaw Locking Pliers Set ( 5CR / 7CR / 10CR)

Shipping Weight:0.051; Net Weight:0.05; Listing Date:10/20/2022

Paslode IM65 chisel point brads for Impulse IM65 F16 gas brad nailer. Electro galvanised light duty protection F16 gauge lost head 1.65mm wire brads glued, supplied with Paslode Special Impulse gas fuel cells which drives up to 1,000 brads per cell.Electro Galv: Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.

These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 50 Bag 10

The Zarges Fibreglass Swingback Steps have non-conductive, glass reinforced stiles making them ideal for electrical contractors. The stepladder has strong, locking side arms and double riveted, non-slip feet. Its aluminium treads are also double riveted for extra durability. Conforms to EN 131 standards, 150 Kilo rating.Number of Treads: 6.Open Height: 1.6m.Closed Length: 1.78m.Overall Base Width: 0.55m.Base Spread: 1.25m.Weight: 8.1kg. Delivered Direct to Business, Site or Home, please note a carriage surcharge may apply dependant on the delivery address, please contact us for further details.

The Knipex 7 Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity, e.g. air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 & 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.

Stabila 196-2E Electronic Level with IP65 protection against water and dust. This professional quality level with electronic inclinometer is ideal for carpenters, joiners, kitchen builders, metalworkers, formworkers, construction engineers, pipe fitters and many more.The Electronic inclinometer has a dual display for accurate easy reading of inclinations in all positions. A second display located in the upper surface for easier reading of the measured value. With angle indication in degrees, percentage, mm/m, in/ft. Accoustic signal for horizontal and vertical measuring, audible inclination guide with three different signal tones allowing the user to arrange elements without having to look at the spirit level. With automatic switch off can be selected after 10min or 2 hours. As a spirit level it has extra long ribbed profile providing a high resistance to deformation during everyday use on site and a permanently moulded precision vials for overhead reading - no readjustment required. It has removeable endcaps for measuring flush into corners, a special coating to protect level against dirt and ruberised handholes for easier handling. Measuring accuracy of electronic module @ 0° and 90° 0.05° @ 1° and 89° 0.2° Measuring accuracy of spirit level: in normal position: 0.029° = 0.5mm/m, and in upside down position 0.029° = 0.5mm/m. Protection Class: IP65.Stabila 196-2 Electronic Spirit Level. Length: 600mm (24 in).