Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 75mm.Pack quantity: 50.
Stahlwille reversible, fine tooth Ratchet Insert Tool with 60 teeth. Long-term loading of the input and output square drive is in accordance with DIN EN ISO 6789:2003. NOTE: Please pay attention to insert size required - 9 x 12 or 14 x 18.CAUTION: A modified torque setting is required if using the size 40HD. MADE IN GERMANY.Stahlwille Ratchet Insert Tool. Size: 9 x 12mm.Drive: 3/8 in.
The Weller 18 Volt WHS40 Temperature Controlled Solder Iron has a temperature range of 200 - 450°C and eliminates the risk of heat spikes commonly associated with stations without temperature control. Equipped with an 18 Volt low voltage iron with an ergonomic handle, allowing the user to comfortably get closer to the job at hand. Specification Input Power: 18 Volt.Temperature: 200-450°C.Tip: T0054321199, S32 Solid Longlife Tip 2.mm, SI15/SPI16.Weight: 1.48kg.
The Plasplugs Super Grips™ wall plugs are suitable for fixing into concrete and brick. They are available in 3 different sizes/colours. Yellow: Regular-duty, accepts screws No 4-8 (3-4.5mm).Red: Regular-duty, accepts screws No 6-12 (3.5-5.5mm).Brown: Heavy-duty, accepts screws No 8-14 (4.5-7mm).The yellow wall plugs are regular-duty and will accept screws No 4-8 (3-4.5mm). This pack is also supplied with screws.Drill: 5mm.Pack quantity: 20.
Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L
