The Apache Dry Max Polo T Shirts are lightweight and breathable and keep you dry by wicking moisture away from the skin. Made from 100% knitted polyester fabric, polyester pique, 150g meaning these easy-care garments are fast drying. 1 x Apache Dry Max Polo T Shirt Medium (42in)
Weller Butane Gas operated soldering iron set is suitable for all kinds of applications. The 3 function soldering iron allows the tool to be used for soldering, hot air and open flame with an operating time of 30 minutes. Features Piezo electronic automatic ignition system and gas capacity display. Supplied in a sturdy storage box.Gas not supplied. Use gas refill PGR1. Comes with: Solder, lead free 1.0mm Dia, 15g, Cleaning Sponge, 3 Soldering Tips: Conical 1.0 mm UND, 2.4mm Chisel Shaped, 2.4mm Plus 'Hot Knife' heat shrinking tip. Specification Max. Temperature Soldering Tip: up to 450°C.Hot Air Nozzle: up to 450°C.Open Flame: up to 1300°C.
The Makita 9920 Belt Sander has the following features:- Variable speed control.- Constant speed under load.- High power for stock removal.- Flat top for inverted applications.- Dust bag.- Long cable for sanding runs.- Double insulated. Technical specifications:Belt Size: 76 x 610mm.Belt Speed: 210 - 440m/min.Power rating: 1,010 watt.Vibration sanding: 2.5m/sec².Vibration K factor: 1.5m/sec².Noise sound power: 96 dB(A).Noise sound pressure : 85 dB(A).Noise K factor: 3 dB(A).Net weight: 4.5kg. Supplied with:Abrasive belt.Cork/carbon pad.Dust bag.The Makita MAK9920L Belt Sander Variable Speed uses 110 volt.
The Makita DHP459 features: Compact design with an overall length of only 192mm. Single sleeve keyless chuck allows for easy bit installation/removal by one hand. LED Job light with pre-glow function. BLDC motor specially designed to provide, above all, more work amount on a single full battery charge.
The design enables these Tool Clips to be used in a wide variety of applications to either display, hold or store a number of items including tools, brooms, rails etc... CT pattern tool clips, bright zinc plated. Sizes available: from 1/4in to 1.1/2in diameter.Size: 1/2inSupplied in packets of 25 clips
Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size. 300mm (12in)Cut half round bastard Flat Side: Double CutHalf Round: Double Cut.Tanged
