Modeka Breeze Textil Pants Black Grey M

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr

Deep inside a desert burial mound you find him, the all-powerful god of mountain and earth. It is in front of him that you will answer the riddle of steel and the calculus of cool. For he is Krom, and you will not be cast out of Valhalla. Not you, not today. Features
Meets DOT FMVSS 218 (US), ECE 22-05 (Europe), & PSC (Japan) Helmet Safety Standards. Does not ship with PSC certification stickers unless purchased from an authorized dealer in that country. Includes internal DropShield™ and Clear quick-change fog-free FliteShield™. Removable HydraDry™ moisture wicking liner. Injection molded Polycarbonate shell for strength.
Fit The most common helmet fit type, the Intermediate Oval head is slightly shorter front-to-back and a little wider side-to-side. Venting 4 intake vents, including a MX inspired chinbar vent, and 2 exhaust ports are coupled with deep channeling in the interior energy absorbing EPS foam resulting in superior helmet venting. Weight Average - A reduced shell profile helps reduce overall weight, while maintaining the the exclusive World Standard of ICON to suit your riding style. Exterior The helmet’s ventilation system consists of strategically placed air vents, intakes, air channels and exhaust ports. The oversized chinbar intake enhances airflow, keeping you cool by routing air where you need it most. A decrease of both drag and weight was achieved by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference. Shield The Airflite has not one, but two shields. The unique quick-change fog-free shield keeps debris away from your money maker, while the internal interchangeable drop shield has the sun in check. No more swapping shields for cloudy or sunny days. Just reach up, flip the switch, and ride forever. Interior The removable sweat wicking Hydradry™ liner provides a snug and contoured fit. Air from the vents is channeled between the comfort liner and the protective,energy absorbing EPS foam liner to create a nearly perfect rider-focused interior. The airflow works in conjunction with the Hydradry™ liner to effectively reduce heat build up. Combine that with superior venting and a removable breath deflector which creates a nearly perfect rider-focused enclosure. ICON FliteShield™ Compatible with the Airflite™ helmet. Featuring a 3D molded process for optical clarity, and a fog-free coating. Icon DropShield™ Instead of carrying an extra FliteShield™ for changing light conditions, with the flip of a switch, engage the tinted DropShield™ hidden within the helmet.

The new Dakar glove combines all the necessary functions for a safe ride in summer! This ultra ergonomic glove offers you an ideal balance between ventilation and protection. The rubber ankle protector features a high impact absorption, guaranteeing the maximum safety standard for this summer glove. The combination of soft goat leather and the multi-stretchy and breathable zones, guarantee a perfect stop on your long and hot trip to the Dakar finish! Features
Goat leather combined with nyspan, air mesh & spandex Rubber knuckle protector Richa gel impact protection Temper foam reinforcements on palm & little finger Conductive fabric on index finger & thumb (for smartphone or navigation system)

Equipment: Classic 5-pocket style without knee joint Customizable leg length Hip and knee protectors retrofit
Material: about 1.2 mm thick cowhide Lightweight lining
Upper: 100% leather
Lining: 100% polyester

Universal handlebars, also suitable for motorcycles with hand guards Material
1200D polyester, anti-UV, compliant with ISO 4892-2 regulation, PE padding. Materials compliant with REACH regulation
Other features
Left / right straps with quick release buckles for easy installation Rigid insert to keep the opening open for the wrist Reflective imprints Each handlebar has two attachment points on the handlebar:
1. Exterior: direct attachment to the handlebar using straps and elastic straps 2. Inside: attachment to the handguard with straps (to adjust the position)
Important note: The handlebars are supplied without accessories!

Descrition:Horn switch control line: yellow + green line.Headlight switch control line: red line + black line.Universal switch for 7/8 diameter handlebars.Get your dirt bike street legal with the motorcycle control switch.Made of high quality material, waterproof and can resist extremely weather conditions.This Switch is Small in size does not take up much room on your bars,It can be easily mounted over your existing clutch lever perch to save space.Specification:Color: BlackMaterial: PVC, ABS, Heavy duty aluminum shellVoltage: 12V DCCable Length: 48cmFitment:7/8 inch diameter barsFor reference: For Honda/Suzuki/Yamaha/Kawasaki/Harley/KTM/Ducati/Aprilia/Vespa/Kymco/Piaagio/Agusta/KTM/BMWMotorcycles / Scooters / Dirt Bikes / Quad / ATVs / Banshee / PolarisFit all with 7/8 handlebarsNote:1. Please check the specifications above to make sure itfits your bike and is suitable for your motorcycle, dirt bike or ATV or pit bike.2. Manual measuring, please allow 1 ~ 5 mm error,thank you.3. Due to the difference between different monitors,the picture may not reflect the actual color of the item.We guarantee the style is the same as shown in the picture.Package Included:1 X Motorcycle Handlebar Headlight Head Switch