Kostenlos
Unterstützung
Features
Regular/Straight cut in the Five-Pocket design ergonomically adjusted cut stylish comfortable fit through stretch content height adjustable pockets for knee protectors pockets for hip protector particularly abrasion and tear resistant thanks to DuPont™ Kevlar® fiber
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
The Accuri sets the benchmark for premium performance at an obtainable price allowing you to silently focus on your competition. Crafted from the finest materials, the Accuri ensures optimal performance with an enhanced field of vision. You have enough obstacles to negotiate when riding off-road. Poor visibility shouldn t be one of them. The Enduro goggle system features a specially developed dual-pane lens to prevent fogging, enabling you to zero in on the obstacles ahead through any treacherous conditions you throw at it. Features
Dual-pane scratch resistant lens prevents fogging in all riding conditions Topview lens technology increases peripheral vision and ventilation Oversized 45mm wide silicon coated strap eliminates slippage Flexible urethane frame design enhances fit with increased durability Utilizes the same replacement lens as all other 100% goggles
The SP ConnectTM Moto Bundle lets you mount your smartphone to your motorbike in seconds. Fasten the Moto Mount Pro to the handlebars of your motorcycle and you are ready to mount the SP ConnectTM Phone Case (or Universal Interface) by placing it on the mount and turning it 90° clockwise. To further protect your smartphone the mount also has a unique vibration dampening system that cuts G-forces by up to 40% (depending on bike & phone model). Your mobile phone is securely positioned right in the center of your vision, allowing you to navigate, access your playlists, read messages. Use the Weather Cover to protect your phone from rain and dirt as well as to provide additional shock resistance if necessary. Included
1x Phone Case 1x Weather Cover 1x Moto Mount Pro 3x Plastic spacing inserts 1x StandTool 1x Case Cap 1x Microrail Adhesive
Phone Case
Slim, protective, functional Use of all ports and buttons 3-layer case construction for ultimate safeguarding
Weather Cover
Protects against rain, sweat, dust or mud Adds shock resistance to your phone
Moto Mount Pro
Vibration dampening system CNC machined from aircraft grade aluminum Portrait / Landscape Orientation 360° rotation Fits standard and oversize handlebars ( à 2,22 / 2,54 / 2,86 / 3,17 cm or 0,875 / 1,0 / 1,125 / 1,25 inches ) Stainless steel hardware
Note Thick screen protectors or gloves can limit the usability of your touchscreen in combination with the Weather Cover. The Weather Cover can further affect the homebutton functionality of iPhone 8, 8 Plus, 7 & 7 Plus. This can be compensated by enabling the software homebutton (Assistive Touch). The Moto Mount Pro is compatible with following motorcycles > *example picture
Features
Wind zero polyester combined with goat leather Breathable wind- & waterproof Hipora® membrane Hard knuckle protector in accordance with EN-13594:2002
