Libre
Soutien
Professioneller PAR Scheinwerfer mit 108 superhellen LED (36 x rot, 36 x grün, 36 x blau) und RGB Farbsystem in einem soliden Aluminiumgehäuse und einem Abstrahlwinkel von 25 Grad. Die CLP 56 RGB 10 PS verfügt über einen doppelten Bügel und eignet sich damit sowohl zum Einsatz als Floorpar ebenso wie zur Montage an Traversen und Bars. Die Ansteuerung erfolgt wahlweise über das DMX Protokoll (3-pol. XLR) mit drei und sechs Steuerkanälen, im Master/Slave Mode oder im Stand Alone Betrieb (Sound-To-Light, Farbwechsel, Festfarben). Die Bedienung erfolgt über drei Taster und ein LED Display. Die Leistungsaufnahme der CLP 56 RGB 10 PS beträgt lediglich 20 Watt. Technische Daten 108 ultrahelle 10 mm LED in RGB Abstrahlwinkel 25 Grad Minimale Leistungsaufnahme, nur 20 Watt Betrieb über DMX, Master/Slave oder Standalone Inklusive doppeltem Bügel Art der Kühlung: Konvektion Klassisches, stabiles Gehäuse Product: LED Par Can Type: PAR56 Colour Range: RGB Number of LEDs: 108 (36 x red, 36 x green, 36 x blue) LED Type: 10 mm Beam Angle: 25° DMX Input: XLR 3-pole DMX Output: XLR 3-pole DMX Mode: 4/6-channel selectable DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave Controls: Mode, Value Up, Value Down Indicators: LED Display Power Supply: 230 V Power Consumption: 20 W Power Connector: Schuko Housing Material: Aluminium Housing Colour: Polished Dimensions (without mounting bracket): 230 x 250 x 260 mm
Bringing power pondside is a very sensible move for all pondkeepers. This highly affordable switchbox takes 'normal' electrical cable in through its inlet and this power can then be shared by up to three different electrical devices (e.g. pump, UV and lighting). Each item can then be individually controlled away from your mains electric..
Der Z-800MKII setzt mit einer neuen Technologie von Antari Maßstäbe in punkto Mobilität bzw. Tragbarkeit sowie einfache Bedienung. Perfekt geeignet für kleinere Einsätze bzw. Räumlichkeiten, z. B. DJ-Setups. Der Z-800MKII ist drahtlos steuerbar, über Timer oder im Stand-alone-Modus. Der Output ist konstant. Durch die schnelle Aufheizzeit von nur 100 Sek. kann das Gerät einen gleichmäßigen kontinuierlichen Nebel produzieren, so lange wie nötig. Der Rauch ist ungiftig, sauber und geruchlos und hinterläßt keine Rückstände innerhalb des Heizsystems. Außerdem ist der innere spiralförmige Heizstab aus rostfreiem High-tech-Stahl gefertigt, dies ermöglicht die effektivste Heizenergie-Übertragung. Mit dem hocheffizienten Power-Control-System läuft der Fogger bei niedriger Temperatur, dies spart bis zu 20% Strom.
4 luces LED Kit de 2 Blanco 2 Red de 1/10 1/8 Traxxas HSP Redcat RC4WD Tamiya axial SCX10 D90 HPI RC Car
The ADJ Mega QA Go is a compact, low profile battery powered LED Par designed for uplighting and stage lighting, and will bring color and excitement to any party. This fixture features an unique ?sit-flat? design so that it may sit directly on the ground or inside truss without the scissor yoke because the power & DMX ins and outs are mounted on the side of the fixture, not on the rear. The Mega QA Go features 5 x 4-Watt, 4-IN-1 RGBA LEDs which offers smooth Color Mixing, has a 40-degree beam angle, 5 operational modes (including DMX, Sound Active Mode, RGBA Dimmer Mode, Auto Run Mode, & Static Color Mode), and has 8 DMX Channel modes for a variety of programming options. Users can also use the Airstream IR App or ADJ UC IR wireless remote, which is sold separately, to control the Mega QA Go. Technische Daten Rechargeable Lithium battery life: 4 hours full on (with a full charge); 5.5 Hours in Energy Saving Mode (with full charge, 4 hours charge time Stand Alone or Master/Slave Configuration Beam Angle: 40 degrees 64 built-in Color Macros DMX-512 protocol Color strobe effect Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers Compatible with UC IR wireless remote (sold separately) & Airstream IR app Linkable via 3-pin XLR cable Electronic Dimming: 0-100% Flicker Free Includes a scissor yoke to hang on truss, mount on a wall or set on the ground Ultra bright slim flat black Par with 5 x 4-Watt, 4-IN-1 Quad RGBA LEDs (rated at 50,000 hrs.) Smooth color mixing (fast or slow color change operation) Unique ?sit-flat? design: Power & DMX Ins/Outs intelligently designed so the unit can be set flat on the ground or set inside truss Rechargeable Lithium battery built-in to fixture 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 5 Operational modes: Auto Run Mode (16 Color Change Mode, 16 Color Fade Modes, & 1 Combined Mode), Sound Active Mode (16 Modes), RGBA Dimmer Mode, Static Color Mode (64 Colors), and DMX Controlled Digital DMX Display with 4-button menu for easy navigation Power Draw: 28W Max IEC AC input and out put on the side of the fixture to daisy chain the power cords (link up to 20 fixtures) Multi-voltage operation: AC 100V-240V 50/60Hz Dimensions (LxWxH): 5.5\"x 9\" x 10\"/ 253 x 227 x 140mm Weight: 4 lbs./ 1.9 kg.
Das aktive 15\"/1,4\" 2-Wege-System ist die erste Wahl für die Verwendung als Fullrange- FOH-Lautsprecher für Musiker und DJs. Die S115 überzeugt durch gleichfalls kräftige Mitten und weitreichende Hochtonwiedergabe mit konstanter Abstrahlung bei hohen Schallpegel. Technische Daten Speaker Type: 2-Way Active Speaker Akustische Daten Frequency Response [-10dB]: 46 - 20.000 Hz Max SPL: 133 dB HF: 1.4 \" Type HF: Titanium Compression driver Voice Coil HF: 2.8\" Directivity: 60 x 40 ° Horn: CD Horn Rotatable Horn: YES LF: 15\" Voice Coil LF: 3\" Verstärker Amp Technology: Digipro® G2 Amp Class: Class D Power PRG: 1000 W Peak Power: 2000 W Prozessor Controller: DSP 24bit/48kHz System Presets: Flat, Boost Limiter: Dual Active Peak, RMS, Thermal Crossover Frequency MF-HF: 1100 Hz Slope MF-HF: 24 dB/Octave Eingang Mechanik Housing: Multiplex with H.E.T coating, reinforced Width: 509 mm (20.36 in) Height: 765 mm (30.6 in) Depth: 533 mm (21.32 in) Weight: 33 kg (72.75 lbs)