Libre
Soutien
Der LD Systems SAT42G2 ist ein ultrakompakter 2-Weg-Lautsprecher, der sich für kleinere Installationen und dezente Integration in praktisch jedes Ambiente eignet, z.B. in der Gastronomie, im Einzelhandel, aber auch zu Hause. Für einen ausgewogenen Klang mit 60° x 60° Abstrahlwinkel und den maximalen Schalldruck von 103dB sorgen der 4\" Custom-Woofer und eine 1\" Seidenkalotte mit Waveguide, die Impedanz von 16 Ohm erlaubt den Parallelbetrieb von acht SAT42G2 an 2 Ohm. Wird ein tiefreichendes Bassfundament mit kräftigem Schub gewünscht, sind die Subwoofer der LD-Installationsreihe die ideale Ergänzung. Das Gehäuse mit robustem Strukturlack ist aus 12mm starkem MDF und in schwarz und weiß erhältlich. M6-Einsätze und der mitgelieferte Montagebügel bieten vielfältige Befestigungsmöglichkeiten, ein Universal-Gelenkhalter wird als Zubehör angeboten. Der Anschluß erfolgt über Federklemmen. Technische Daten Model Name: LDSAT42G2 Type: Sealed Components: Woofer 4\" Custom Made, Compression Driver 1\" Custom Made Dispersion: 60° x 60° Power Capacity (Cont.): 60 W Frequency Range: 75 Hz - 20 kHz SPL (1 W / 1 m): 85 dB Max SPL: 103 dB Impedance: 16 ohms Connectors: Input Clamp - type Cabinet Material: 12 mm MDF Cabinet Surface: Painting Dimensions (W x H x D): 140 x 230 x 125 mm Features: M6 rigging / mounting points, mounting brackets Lieferumfang: 1 Paar
Die INVoTONE IPS-Serie ist ein Boxenlinie mit einer für diese Klasse hervorragenden Klangabstimmung. Diese Kunststoff-Lautsprecher bestechen durch ihre ausgewogenen Wiedergabeeigenschaften. Sie verfügen über 6 Hängepunkte mit M10 Gewinde, einen Hochständerflansch für Standard LS-Stative und 2 Griffe. Das Biamp Verstärkermodul arbeitet mit Class AB Technologie und ist mit diversen Schutzschaltungen wie Überhitzungsschutz, Kompressor, Limiter und Übersteuerungs-Schutz versehen. Technische Daten Leistungsverstärker 250 Watt RMS Frequenzgang (-10dB) 55Hz-20kHz, FLAT Schalldruck SPL @ 1m 119dB Max. Abstrahlwinkel ( HxV ) 90 x 45 nominal Bestückung Low 12\" Woofer, 2\" Schwingspule mit Double Venlaon Bestückung High 1\" Neodymtreiber Akve Weiche 3,4 kHz, Analog Prozessor, EQ. LOUDNESS schaltbar Anschlüsse LINE-COMBO Buchse, LINK-XLR-Out Balanced (15kohm) Eingangspegel Line 0dBu Regler/Schalter/Anzeigen Lautstärkeregler / Kontour / Power ON mit grüner LED / Ground LiE Netzteil 220-240 Volt - 50/60Hz Gehäusekonstrukon Kunststoffgehäuse, Monitorwinkel, Metallgi!er, Gummifüße, 2 Griffe Hardware Hochständerflansch, 6 x M10 Gewinde Maße (HxBxT) 664 x 396 x 362 mm Ne!o Gewicht 20.5kg / 45.19 lbs
ACHTUNG: Bei diesem Artikel handelt es sich um B-Ware bzw. Vorführware mit leichten Gebrauchsspuren! Der KS10 ist ein Semi-Hornloaded Subwoofer und bietet ein modernes akustisches Verhalten und eine erhöhte Reichweite bei der Verwendung im Cluster. Dank dem neuen integrierten DSP verfügen beide Modelle nun serienmäßig über ein integreirtes Delay zur Laufzeitanpassung und ermöglichen so ohne weiteres Zubehör auch komplexere Subwoofer-Aufstellungskonzepte für eine optimale Schallverteilung. Der KS10 ist vorbereitet zur Aufnahme von optionaler Flugahrdware und lässt sich so mit DRK10/20 und in Kombinantion mit DVA K5/T4/T8 und T12 fliegen. KS10 ist vorbereitet zu rückwärtigen Montage von Rollen! Technische Daten Active Semi-horn loaded Flyable Subwoofer Akustische Daten Frequency Response [- 10 dB]: 41 Hz - 120 Hz Max SPL: 134 dB Directivity: Omnidirectional LF: 18 \" Voice Coil LF: 4 \" Verstärker Amp Technology: Digipro® G3 Amp Class: Class D RMS Power : 900 W Peak Power : 1800 W Cooling: Convection Power Supply : 900 W SMPS with auto range PSU Prozessor Controller: DSP 56 Bit AD/DA COnverter : 24 Bit / 48 KHz Limiter: Dual Active Multiband RMS, Peak, Thermal Crossover Frequency LF-HF: 90, 120 Hz (selectable) Slope LF-HF: 24 dB/Octave Eingang Input Section : 2X XLR Balanced Output Section : 2x XLR Balanced Power Sockets: 1 x Powercon In + 1 x Powercon Out Controls: 1 x Input Sensitivity Rotary Switch 1 x DSP Setup Rotary Encoder (up to 4.5 ms) 1 x Phase Inversion Switch (0°-180°) 1 x X-Over Frequency Switch (90 Hz, 120Hz) 1 x Output Mode Switch (Link - X-Over) Mechanik Housing: Multiplex plywood Handles: 2x Side Pole Mount: 1x M20 on top Rigging Points: 2xPick Points on top to fix DRK 10/20 rigging frames DRK10/20 flybar Width: 515 mm Height: 640 mm Depth: 720 mm Weight: 43.4 kg
2in Herbe Cutter 3.6 V UE Rechargeable Pruning Outil Brosse Élagage Cisailles Herbe Sans Fil Électrique Taille-haie Tondeuse À Gazon Outils
Kompaktes 2-Wege-Gehäuse für einen natürlichen und direkten hochwertigen Klang. Mit 12db/Oktave Filter mit passivem Limiter. Ausgestattet mit einem Kalottenhochtöner aus Titan. Durch seinen natürlichen Frequenzgang können Töne sehr weit verstärkt werden, bevor es zu einem Feedback kommt. Das 60° x 40° Horn sorgt für eine gleichmäßige Raumverteilung und einen weichen Frequenzgang, sowohl in direkter Linie vor dem Lautsprecher als auch schräg davon. Die Oberfläche des XT-12 MKII besteht aus kratzfestem Sprühlack. Technische Daten Nennimpedanz: 8 Ohm Kontinuierliche Leistung: 350 Watt: Musikleistung: 700 Watt: Spitzenleistung: 1400 Watt RMS. Frequenzgang (-3 dB): 47 - 20,000 Hz. Frequenzbereich (-10 dB): 37 - 22.000 Hz Empfohlener Hochpassfilter: 42 Hz, BW-24 Crossover-Frequenz: 1600 Hz, 12 dB/Okt Empfindlichkeit (Vollraum): 99 dB / W / m Peak SPL @1 m (theoretisch): 130,5 dB Nennabstrahlwinkel (HxV): 60° x 40° Abmessungen: 410 x 390 x 710 mm Gewicht: 23,2 kg
ADJ´s myDMX 3.0 is a multi-platform DMX control software/hardware system (Windows and OSX Mac compatible). myDMX 3.0RM has a new, robust, 19\" rack mount, hardware dongle and exciting new features to take greater command of your light show. myDMX 3.0RM allows you to program your light show with myDMX 3.0 software, upload programmed data to myDMX 3.0RM then playback straight from myDMX 3.0RM in stand-alone mode without a computer. This is the ideal control solution for clubs, bars, schools and event venues where you want to make it as simple as possible. Out of the package, myDMX 3.0 software will run in Express Mode; 512 \"Live\" DMX channels & 512 \"Stand Alone\" DMX channels (No 3D visualizer, Easy Remote or Midi features). myDMX 3RM is a great solution for a lighting designer to leave at a venue so that their staff can trigger lighting scenes without the use of a computer or myDMX software. Technische Daten Features (Some features listed below require myDMX 3.0RM to be connected to a computer): 16 Assignable port triggers Arrange scenes into groups Sound-light with BPM audio analysis and pulse analysis Live snapshots Live scene dimming and scene speed controls BPM tap Flash scenes Blind editing - edit scenes without outputting the DMX Fully compatible with myDMX 2.1 software Easy-to-use DMX software 512 Live DMX channels 512 Stand-Alone channels Extensive fixture profile library SSL2 Profile editor & support Drag and drop effects generator Works with simple scenes/steps Windows and Mac installers that will download the latest ssl library with an internet connection upon install. \"Maintenance\" application that installs with the program to check for component updates or new versions of the software. \"Cloud search for profiles\" Search for the latest and greatest fixture profiles from within the program itself, no more hunting through dropbox Improved multi Pan and Tilt support Users can select multi select steps in a scene and modify a channel parameter without it interfering with the rest of the channels Vast optimizations and stability improvements for both Windows and Mac OS Not compatible with ARM based Windows tablets (only Intel) Additional features and software upgrades available at https://store.dmxsoft.com/ Minimum System Requirements: Computer working under Windows 7 or higher, or MAC OS X 10.10 or higher 1 GHz speed processor 2 GB Memory (RAM) 1280*768 pixel screen OpenGL 3.1 (for 3D) Best Performance System Requirements: Computer working under Windows 7 or higher, or MAC OSx 10.10 or higher 2 GHz speed processor, dual core 4 GB Memory (RAM) Video card with 1GB video memory 1920*1080 pixel screen OpenGL 3.1 (for 3D)