Libre
Soutien
Magnetic screwdriver bit holder for 1/4in shank screwdriver bits.
BlueSpot 20 piece cleaning and polishing set comprising the following: 3 x 1in Polishing wheels.1 x Polishing compound.1 x Felt polishing wheel with shank.3 x Nylon brushes: 7/8in, 1/2in, 1/8in nylon brush.1 x 7/8in Steel brush.2 x Mandrels.2 x 7/8in Emery polishing wheels.1 x Felt polishing tip.6 x 1/2in Felt polishing wheels.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 8.5Adjustment . 184 - 216mmAdjustment. 7.1/4 - 8.1/2in
Unique, patented OMEGA bend. The innovative OMEGA screw clamp is produced entirely from BESSEY precision steel. A lightweight screw clamp that is both extremely easy-to-handle, and exceptionally robust. But the real innovation is its unique, patented OMEGA bend. This allows increased deflection of the fixed jaw, adding lateral tension to the screw resulting in considerable reduction in the resonant frequency. That means that, even when vibrations are present, this clamp will maintain its clamping pressure longer than a conventional screw. High-quality 2-component plastic handle.Pressure plates may be changed without tools.Universally applicable within the fields of wood and metal processing. Your benefits at a glance:1 Innovative OMEGA bend.The patented OMEGA bend gives you added safety. It means you lose even less clamping pressure, even when vibrations are present. 2 Versatility.Fixed arm and pressure plate are produced and tempered from a single piece of high quality BESSEY steel. Clamping is resilient and elastic. 3 Close flat clamping.The OMEGA bend applies the rail absolutely flat to the surface of the work piece. This allows clamping right into the corners. 4 BESSEY Best-Comfort-System.With BESSEY Best-Comfort-System, all applications and tasks are well within your grasp. Pressure plates can be changed quickly without the need for tools, to make BESSEY comfort still more inviting.The Bessey GM40Z2K has the following:Clamping force up to 5,000NOpening 400mmThroat depth 120mmRail 25 x 12mmWeight 1.95Kg
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The Plantpak Half Propagator Lids are suitable for use with the Half Seed Trays (PPK70200006). They are lightweight, durable and allow in maximum light whilst retaining optimum heat and humidity within the growing environment. Supplied in packs of 50.