Knipex High Leverage Centre Cutters Cushion Grip 74 91 250

Faithfull Centre punch with a square head which provides a larger striking area and prevents the punch rolling when laid on the bench. Carefully hardened and tempered and with a 90° ground point.Point Diameter: 1.6mm (1/16 in)Length: 100mm (4 in)

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw Zinc Plated M10 x 30 Bag 10

Faithfull aluminium oxide abrasive on a flexible paper backing with the added convenience of the hook and loop quick change system. Suitable for use on wood, metal, plastics and filler. Pattern: Plain.Diameter: 125mm. Assorted grits.

BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 40mmColour : Brown.Pack : Clam pack of 1000.

Hammerite "Direct to Rust" Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3-in-1 formula, there is no need to use a primer or undercoat...saving you precious time! It forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion-resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Two coats are required and protects up to 8 years. Specification: Colour : Yellow Finish : Smooth Size : 2.5L Coverage : 5m²/L

The Teng Tools Mega Bite range of Pliers have been designed to ensure the highest quality and optimum functionality. The overall length of the pliers gives a maximum leverage to suit the pliers function. These Teng Tools Side Cutting Pliers are suitable for heavy-duty applications and allow up to a 72 degree cutting angle. They are manufactured from high carbon steel, with Titanium coated joints for excellent strength and durability. For a comfortable grip, the pliers have Vinyl-coated handles. The TENMB442 Mega Bite Side Cutting Pliers have the following specifications:Length: 200mm (8 inch).Cutting capacity piano wire: 2.5mm.Cutting capacity Steel wire: 4.0mm.