Libre
Soutien
Features:Fits models : CH13, CH14, CH15, CV13, CV14, CV15CV16.Specification:Name: CarburetorMaterial: MetalColor: SilverCarburetor Dimensions:Engine Opening O.D.:27.5mmBolt Hole Spacing:52mmNote:1.Please allow 1-3mm errors due to manual measurement.Package Included:1 X Carburetor
MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr
Weather type
All-weather Waterproof
Lining
Raintex DL membrane detachable thermo liner
Visibility
Side Eye
Protection
hip protector prepared adjustable Protection at knee (Knox)
Other specs
Flexibelt 2.0 Heatshield Long connection zipper Short connection zipper Pockets on upper leg Suspender prepared Waist lock
Holbrook is a timeless, classic design fused with modern Oakley technology. Inspired by the screen heroes from the 1940s, 50s, and 60s, this design epitomizes the spirit of exploration and adventure. The iconic American frame design is accented by metal rivets and Oakley icons, perfect for those who seek equal parts performance and style. Features
Oakley HDPolarized lenses filter out 99% of reflected glare without the haze and optical distortion that can come with traditional polarized lenses. Plutonite® Lenses offer top UV Protection filtering 100% of all UVA, UVB, UVC and harmful blue light up to 400nm Patented High Definition Optics® (HDO®) provides superior optical clarity and razor-sharp vision at every angle O-Matter™ stress-resistant frame material is both lightweight and durable for all-day comfort and protection
PRIZM™ Prizm™ is a revolution in lens optics built on decades of color science research. Prizm™ lenses provide unprecedented control of light transmission resulting in colors precisely tuned to maximize contrast and enhance visibility. High Definition Optics® High Definition Optics® (HDO®) is a collection of patented technologies that allow Oakley eyewear to meet or exceed the testing standards of the American National Standards Institute for optical clarity, visual fidelity, and impact resistance. Frame Fit
1 Lens Width 55 mm 2 Bridge Width 18 mm 3 Lens Height 43 mm 4 Temple Arm Length 137 mm
A simple-elegant, stylish and fashionable look. Once inflated, the airbag protects the thorax, abdomen and full length of the ack, from collarbone to coccyx. Features
Soft Shell Material Fits ideally to the body shape thanks to bellows fold. Adapts to the different jacket lengths. Integrated trigger. 2 outer breast pockets. Reflective material Integrated back plate Safety level 1. Universal vehicle belt Weight: 1.3 kg Inflation time: 0.1 sec. Design and conception in France
Shipping info airfreight Due to the safety regulations in the airfreight, we have to remove the gas cartridge of this article for shipping outside the European Union. Upon receipt of the product, you can use any commercially available 60cc or 100cc gas cartridge to restore the function of the airbag.
Oversize version of Spidi VTM pants, with sizes up to 6XL. Tough, resistant waterproof touring/enduro trousers with removable insulating liner, ideal match for a Voyager 2 jacket. Spidi VTM fits perfectly thanks to its several racing-derived stretch inserts and aptly placed adjusts, it is equipped with hip protectors and adjustable knee protectors (Multitech). These trousers feature removable straps and a waistile zipper to become a full-on touring kit for hardcore bike adventurer, but their ease of use adapts well also to more casual riders in need of a barrier against bad weather Material
High visibility reflex areas Highly resistant stretch material for improved fitting High resistance Tenax Tactel polyamide
Ergonomy
Oversize available
Performance
Adjustable knee protectors Removable straps Zipper joint jacket-trousers
Comfort
H2OUT membrane 100g/m2 wadded thermo lining
Protection
Multitech hips/knees