Wera Kraftform Plus Stainless Steel Slot Screwdriver 8.0mm

Mango Hexagonal de acero inoxidable Desbarbado Herramienta de achaflanado externo Máquina de biselado Quitar rebabas Reparaciones Herramientas

The Makita HP2071F Percussion Drill is fitted with a high power motor but packed into a slender and compact body with durable metal gear housing (with a keyless chuck). The new reversing system allows extended service life of carbon brush and no power reduction even in reverse rotation. It is fitted with a torque limiter, the drill stops when the bit hits against reinforcements. It is supplied with a side handle, depth stop and a carry case. Specification: Input Power: 1,010W No Load Speed: 0-1,200/0-2,900/min Impact Rate: 0-24,000/0-58,000/bpm Capacity: Steel 18mm, Masonry 20mm, Wood 40mm Weight: 2.4kg Vibration Hammer Drilling : 16 m/sec² Vibration K Factor : 1.5 m/sec² Noise Sound Pressure : 99 dB(A) Noise Sound Power : 110 dB(A) Noise K Factor : 3 dB(A)

The Ridgid SeeSnake® nanoReel is ideal for inspecting places where previously only bore scopes were able to reach. Suitable for boiler tubes, supply lines, sprinkler systems and a wide array of speciality applications. Featuring a small 15.5mm camera head that is capable of tight turns, 90° arcs from 30mm upwards without difficulty. The unit is lightweight and compact, allowing easy transport and efficient storage. Offers multiple monitor compatibility, can be used with a SeeSnake® monitor or micro CA-300 and microEXPLORER™ Digital Inspection Cameras. The inner drums are interchangeable to cover different applications.

These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx® compatible head of the screw enables increased torque control. Supplied complete with cover caps and Torx® compatible bit. APPLICATION:Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, TORX® compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, TORX® compatible heads were designed to prevent it and to achieve a desired torque consistently. TORX® compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 202mm Box 100

ABUS Rock 83CS/55mm open shackle heavy-duty fully re-keyable through hardened steel alloy padlock, with a ball bearing locking mechanism for extra security, has a tough through hardened steel alloy shackle as standard with NANO PROTECT™ Chrome Plating, helping to make rusty shackles a thing of the past. Can be adjusted to operate key retaining or no key retaining, automatic locking or key to lock. Where to use: The 83 series range of padlocks offer a medium to high level of security, with the ability to offer various levels of security within one keying system and is suitable for internal or external use.Width : 55mmHeight : 103.5mmDepth : 25mm Shackel Width : 25mmShackle Height : 38.5mmShackle Diameter : 11mmSecurity Level : 8

The Milwaukee® M12 CID Fuel™ 6.35mm (1/4in) hex Impact Driver has 2 modes to cover a number of applications. Mode 1 (0-1,200 rpm, 19Nm torque) is ideal for precision work, whereas Mode 2 (0-2,650rpm, 135Nm torque) delivers maximum performance for the toughest applications. It also has a bright LED light to illuminate the workspace. Designed to out-perform other heavy-duty power tools, it has POWERSTATE™ brushless motors for up to 10 times longer motor life. REDLINK PLUS™ intelligence, providing total system communication with overload protection to increase the tool's life. REDLITHIUM-ION™ battery packs are highly durable and feature a fuel gauge to display the remaining charge. Individual cell monitoring in the battery optimises tool run time. M12 CID-202C: 2 x 12v 2.0Ah Li-Ion Batteries. M12 CID-0: Bare Unit, No Battery or Charger. Specification Bit Holder: 6.35mm (1/4in). No Load Speed: 0-1,200/0-2,650/min. Impact Rate: 2,700/3,550/bpm. Max Torque: 19/135Nm.