Weller Gas Soldering Iron Set - Piezo no gas

The Faithfull universal carpenters hammer with precision ground and hardened pein and head.This well balanced hammer allows maximum use for all types of carpenters fixings.Fitted with a hickory handle.Manufactured in accordance with BS876.Head Weight: 340g (3/4 lb).

The Norbar Adjustable Industrial Torque Wrenches have a robust construction, which gives accurate results to ±4%, even in arduous working conditions. Their large break angle improves accuracy by reducing the possibility of over torqueing and the cam control of the mechanism gives a controlled break which will not throw the operator off balance. The torque wrenches are dual scaled, with both N.m (Newton Meters) and lbf.ft graduations.  Supplied with a declaration of conformance to satisfy the requirements of ISO 6789:2017 and carry case for storage and protection. 3AR Industrial Torque Wrench Specification Drive: 3/4in Square.Range: 100 – 500Nm (70 – 350 lbf.ft).Torque Radius: 683.4mm.Ratchet Teeth: 36.Ratchet Type: Push-Through.Length: 910mm.Weight: 5.2kg.

These Knipex high-quality flat nose pliers are made from fibreglass-reinforced plastic, which is fully insulated and provides protection against bridging for working on live parts up to AC 1000V and DC 1500V. These solid pliers also do not act on magnetic fields and are fully spark-free. They are ideal for meter assembly and meter blocking. In addition, they are excellent for use in chemically aggressive environments. The handles have a soft plastic zone for better grip. Performance: Conform to IEC 609DD, and DIN EN 60900.

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells.FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements.Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating.Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm.Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm.Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316.SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter.Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch.Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification.HEAD TYPES :Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

Scaffold spanner with a stainless steel poker shaped handle and Hex whitworth socket. Size 1/2 Length 215mm (8 1/2 in)

The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117054B Socket 12 Point Standard 1/2 inch Drive 11mm has the following dimensions:Size: 11mmLength: 38mmWeight: 50g