The Britool 3/8in Drive 22 piece metric bi-hex socket set is supplied in a socket set case which also converts into a modular storage system for use in roller cabinets. Consisting of: 17 x 3/8in Bi-Hex Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 & 24mm.2 x 3/8in Extensions: 75 & 125mm .1 x 3/8in Bit Holder 1/4in.1 x 3/8in Universal Joint.1 x 3/8in Reversible Ratchet.
The band clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm all-round clamping which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60° to 180° . Clamping Range Up to 7mBand Width & Depth 25mm x 1mm Angle 60 / 80 DegreesWeight: 0.53Kg
Powdered chalk for refilling chalk line reels.Food Grade Calcium Carbonate Chalk, colour fast and resistant to damp conditions. The twist lock cap on the container makes it easy to use.Colour. Blue for all round interior and exterior use.Size. 2.5lb/1kg
This Teng Tools 1/2 inch square drive Torx socket is manufactured from high quality chrome vanadium steel to conform to all the latest DIN and ISO standards. The socket is branded and labelled for easy identification, and specially designed to help prevent damage to fastenings.The TENM120711 TX-E 1/2inch square drive socket has the following specifications:Overall length 37.8mm.Size. 9.7mm (E11).
Ideal for sensitive workpieces and right angles. The large, perfectly parallel jaw faces are characteristic of the original BESSEY K-body clamp. They allow easy clamping and spreading of sensitive surfaces and right angles. Also round and pointed workpieces. And the best thing is: thanks to their extra-large contact surfaces, the original BESSEY K-body clamp are universally applicable even behind and to the side of the high-quality profiled rail. This allows you to clamp in locations that conventional screw clamps are unable to reach. That's guaranteed! The K-body clamp holds workpieces exactly parallel. Parallel jaw faces with extra-large contact surfaces.Clamping of various shapes, along the whole length of the rail.Universally applicable.Light and easy-to-handle.No need for tools for switching between clamping and spreading. Your benefits at a glance:1 Parallel jaw faces.The large, planar jaw faces made from impact and fracture-resistant reinforced polyamide are exactly parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers. 2 High-quality profiled rail.The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping. 3 Removable end stop.The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.The Bessey UK30 Uniklamp has the following specification: Clamping Force: up to 1,500N.Opening 600mm.Throat Depth: 80mm.Rail: 20 x 5mm.Weight: 0.93kg.
The Bosch S1122BF Blades are part of the "Flexible for Metal" range. - Bi-M, Side Set & Milled - For Thick Sheet Metals (3-8mm), Solid Pipes & Profiles (up to 175mm diameter) Specification: Total Length : 225mm Tooth Spacing : 1.8mm / 14TPI
