Christmas / Classic Theme Wall Decor 100% Polyester Classic / Fantasy Wall Art, 150100 cm Decoration

Herramienta de torneado de madera de torno de acero de aleación Herramienta de corte de llave de carburo Herramientas de cortador de aleación de aluminio

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 108mm (4.25 in).Blade length (B): 8mm (0.31 in). Head width (C): 10.5mm (0.41 in). Head depth (G): 15mm (0.59 in). Cutting capacity: 0.35-1.25mm. Head type: Double angled. Cutting edge: Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area – more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)

The ABUS new generation of padlocks are strong, lightweight and innovative. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. This contemporary product implementation is also reflected in the product design – all the locks in the TITALIUM™ series feature an impressive stainless steel like finish. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Ideal for medium to high risk of theft, the 64TI series TITALIUM™ padlocks are recommended for a wide range of security requirements. All models in this series have a paracentric keyway, chrome plated cylinder cores and hardened steel shackle. Sizes 30mm and above have NANO Protect shackle coating, which assures security and high corrosion resistance. Application:Securing items in areas of medium to high risk of theft. Ideal for chains, doors, gates, cupboards, lockers, toolboxes etc.The ABUKA54586 Keyed Titalium Padlocks have the following specifications: Size: 40mm. Dimensions: 40 x 62 x 22mm. Internal shackle: 22 x 23mm. Key number: KA6411.

Biscuit jointing has proven to be one of the strongest, fastest, safest and most accurate ways to join hard and soft woods, plywood, composition boards etc.Compared to dowelling, biscuit joinery is faster and more precise.The biscuits are made of laminated beech which is then compressed before being die cut.Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e.g. PVA Glue).Trend BSC/20/100 Biscuits Size: No.20 (60 x 23 x 4mm).Pack Size: 100.