This Faithfull 13 Watt Low Energy Lightbulb is an Edison Screw fitting CFL bulb, for use in enclosed inspection lamps. Ideal for the FPPSLGRIPLE and many other lighting appliances that require a short length bulb. Fitting type: Edison E27.Wattage: 13 Watt.Overall Length: 12cm.Voltage: 110 Volt.
Quantité:1 set; Couleur de Lumière:Plusieurs Couleurs,Blanc Froid,Blanc Chaud; Quantité de Perles LED:100; Tension (V):100-240; Lumens:200; Largeur/Diamètre:4mm; Consommation:5; Mode:1 (ON / OFF); Type:Guirlandes Lumineuses,Bandes Lumineuses LED Flexibles; Certification:RoHs; Type de LED:SMD 0603; Longueur:10m; Niveau imperméable:IP 65; Marque:ZDM; Caractéristiques:Décoration de mariage de Noël; Poids Net:0.11; date d'inscription:01/09/2019; Mode de production:Auto-produit; Pays populaire:Italy; Produits spéciaux sélectionnés:COD
There are many different makes and models of cage trap. This easy to set STV076 is a robust spring loaded metal cage trap into which the squirrel enters, lured in by food. And is ideal for indoor and outdoor use. Near the back of the cage is a trip pan, so when the squirrel steps on the pan, it triggers the trap door shut, and the animal is trapped inside, alive. Some other traps are made from different materials, such as solid-walled plastic or other materials. STV076 is made from steel bars. This STV cage trap is large enough to hold the squirrel, and most squirrel-size cage traps are at least 16-inches long and 5-inches high and wide. If its too small, the animal wont fit inside, or may trigger the trip pan, but not allow clearance for the door to shut all the way aiding the squirrels escape. If its too large, the squirrel may run around and smash itself against the cage walls and hurt itself. 44 x 19 x 19cm (17 x 7 1/2 x 7 1/2in)
Hickory shaft hatchet, ideal for trimming branches and root growth. Manufactured from carefully hardened and tempered quality carbon steel, the head is fully ground with polished cutting edges which are protected by a blade guard. Fitted with a traditional hickory handle which is known for its strength and ability to absorb impact. Weight: 567g (1.1/4lb) Handle length: 28cm (11in)
This Scan Hazard sign is made from 1mm thick, durable PVC. Its aggressive water-based adhesive enables the sign to easily stick on to and remain on any wall. It is printed using UV resistant inks, which resist fading. It is easy to read with clear writing and illustration. Complies with BS5499 and/or ISO7010 design criteria where applicable.Helps limit company liability should an accident occur. The SCA1105 safety sign has the following specifications:Size: 200 x 300mmMessage: 'Danger Mind the step'.
