Description:This is a replacement spire/speed clip and bolt kit.This kit is a common size on most bikes.Before buying, check the appropriate size.Specification:Color: BlackMaterial: AluminiumSize:M6 Bolts (6 x 40mm)M6 Bolts (6 x 16mm)M6 Bolts (6 x 20mm)M5 Bolts (5 x 16mm)M5 Bolts (5 x 25mm)Washers 6mmWashers 5mmPackage Included:6 X M6 Bolts20 XM6 Bolts20 XM6 Bolts20 XM5 Bolts8 X M5 Bolts4 X Truss Screws14 X Speed Clips20 X Washers20 X Washers2 X Well Nut
These Forgefix cable ties are suitable for a range of different uses. The ties have a temperature range for continuous use from -40°C to 85°C. Application:These cable ties are suitable for many uses, including gardening, electrical installations, sign installation, point of sale applications and much, much more. They effectively bind and organise several cables or wires together. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter.Cable Tie Natural / Clear 4.8 x 200mm Box 100
Carbon Fiber Gear Shift Knob Head Cover For BMW 3 Series E90 E91 E92 E93Specifications:Material: ABS PlasticColor: Carbon Fiber PatternSize:4.8x9 cmFeatures:- Carbon Fiber Style and OEM Fit- Environmentally friendly Material, Not Change Color, Not Fade, Wear Resistance, Easy to Install and Clean.- High Quality Adhesive, not leave traces after tearing off, not damage the original car.Fitment:For BMW 3 Series E90 2005-2011For BMW 3 Series E91 2005-2012For BMW 3 Series E92 2006-2013For BMW 3 Series E93 2007-2013Package Included:1x Gear Shift Knob CoverInstallation Methods:1. Clean the location of the installation with rubbing alcohol before proceeding. (Make sure to remove any grease, wax or dust etc.)2. Please ensure that the product completely fits before proceeding with installation. (Note: If there any questions or if the product does not fit properly, please contact us.)3. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature,heat installation location, and plate with a hair dryer or a heater on low setting.4. Carefully place the product in desired location and press down for about 1-2 minutes,(Note: Do not wash your car for 24-hour. The adhesive should be cured after 12-hour.)5. The installation is completed.Note:1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.2. Please allow 0.5-1 inch difference due to manual mea
