IRWIN Record Stillson Wrenches are standard equipment in a wide range of major industries. They have drop forged handles and jaws, with high grade cast malleable iron frames. Accurately machined screw threads and nut with sprung jaw which stays open until pressure is applied. Conforms to BS 3594 Part 1.Length. 250 (10 in). Pipe Capacity Nom Bore 25mm (1 in).
This Faithfull rule is extruded from 50 mm wide anodised aluminium, and is clearly graduated on both edges.It also features a handy metric / imperial conversion chart on the reverse and a hanging hole for storage.Imperial and Metric markings.Length: 1m (39 in)
Made from unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)
The Faithfull Brass Ball Chain Kit is ideal for use with basin, sink and bath chains. Supplied with fittings. Chain length: 1 metre.Finish: Polished brass.
Bahco ProfCut Pullsaw is a general carpentry pull-saw for fine, cross and angled cuts. The pull action allows for a thin blade (0.60 mm), creating a minimum of removal (kerf 0.90 mm) and therefore requiring less force. Has a hardpoint, triple edge JT tooth design, and a two-component handle which ensures a comfortable and safe grip. The flexibility of the blade makes it possible to perform excellent cuts close to another surface.Length 300mm (12 in).Teeth 13.5 tpi
These Forgefix Pozi Carcass Screws have an extremely coarse single thread. The have a black phosphate coating for increased durability and a self drill point for easy installation. APPLICATION:Designed specifically for chipboard and MDF (medium density fibre) board and carcass assembly. Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Coarse thread screws have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200
