Rokker Worker Shirt, blue, Size S, blue, Size S

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

PVC Safety Training Inflatable Swimming Pool Arm Ring Circle Float Water Air Sleeves

diminishes dark circles & puffiness see results with this easy to use system seaweed reduces the appearance of fine lines and wrinkles licorice root controls puffiness and reduces the look of dark circles fail-proof answer to flawless skin in minutes

Description:Head locking buckleSeismic advantagesAccessory rail link designPadded suspension designBreathable perspiration designMultifunctional transfer designApplicable scene: tactical must-have, outdoor leisure, daily leisure, home entertainmentSpecification:Name:Camouflage helmetApplicable gender: male and femaleProduct weight: about 0.91kg naked, including about 1kg with packagingApplicable head circumference: suitable for head circumference of 54-62cmProduct size: 27.5 * 25 * 18cm (there is an error in manual measurement)Product material: main body material, guide material and accessories material are FRPThe main material of EPP is polypropylene foam, which is covered with a layer of low-density vinyl compound (LDV).Product Included:1 X Helmet5 X EPP cushion2 X Pair goggle swivel clips (six)1 X Wing-Loc adapter1 X Picatinny adapter1 X multi-function device adapter

Acerbis Fuel-Container
features Material: Polypropylen capacity: ca. 18 Liter

500 D Polyester Gewebe herausnehmbare Reissa®-Membrane: 100 % wasserdicht, 100 % winddicht, atmungsaktiv herausnehmbares Thermofutter YF-Protektoren zertifiziert nach EN 1621-1 an den Schultern und Ellbogen herausnehmbarer Schuam im Rücken SAS-TEC® SCL-19 Rückenprotektor zertifiziert nach EN 1621-2 nachrüstbar reflektierendes 3M Scotchlite ™-Material AirVent-Belüftungsreißverschlüsse 3 Außentaschen 2 wasserdichte Innentasche Verbindungsreißverschluss Sicherheitsnähte