Libre
Soutien
Official website:http://www.mateksys.com/?portfolio=f405-wing#tab-id-3Specification:MCU: 168MHz STM32F405IMU: MPU6000 accelerometer/gyro (SPI)Baro: BMP280 (I2C)OSD: INAV OSD w/ AT7456E chipBlackbox: MicroSD card slot (SD/SDHC)VCP6x UARTs2x Motors, 7x Servos outputs2x I2C3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)Built in inverter for SBUS input (UART2-RX)PPM/UART Shared: UART2-RXSoftSerial on TX2 padBattery Voltage Sensor: 1:10 (Scale 1100)WS2812 Led Strip : YesBeeper : YesRSSI: YesMounting: 30.5 x 30.5mm, 4mm with Grommets 3mmDimensions: 56 x 36 x 13 mmWeight: 25gFC Firmware:INAV FlightTarget: MATEKF405SEPDB:Input voltage range: 9~30V (3~6S LiPo) w/TVS protection2x ESC power padsCurrent Senor: 104A, 3.3V ADC, Scale 317BEC 5V output:Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeedContinuous current: 2 Amps, Max.3ABEC 9V /12V output:Designed for Video Transmitter, Camera, Gimbal ect.Continuous current: 2 Amps, Max.3A12V option with Jumper padBEC Vx output:Designed for ServosVoltage adjustable, 5V Default, 6V or 7.2V via jumperContinuous current: 5 Amps, Max.6AOutput Ripple: 50mV (VIn=24V, VOut=5V@5A load)BEC 3.3V output:Designed for Baro / Compass module and Spektrum RXLinear RegulatorContinuous current: 500mAPackage included:1 xMatek Systems F405-WING(New) STM32F405 Flight Controller Built-in OSD for RC Drone
Beschreibung Radial-Edelstahlkugellager Ausstattung: Rostfrei Hohe Lebensdauer Beidseitige Deckscheiben. Technische Daten: Außen-Ø: 11 mm Inhalt: 1 St. Innen-Ø: 5 mm Produktabmessung, Breite: 5 mm
Mit dem Dynamic Tuning Set können alle fischertechnik Kugelbahnen (Dynamic M, L, XL und Rolling Action) durch zusätzliche Kugelbahn- und Anbauteile noch rasanter und größer gebaut werden. Viele Spezialteile wie 90°- Kurven, Wechselweichen, Fangtrichter, kurze und lange Flexschienen versprechen noch mehr Action. Mit dem Dynamic Tuning Set sind der Kreativität der Parcours-Ingenieure keine Grenzen gesetzt. Hauptmerkmale Funktionen Mindestalter 7 Jahr(e) Anzahl Teile 180 Stück(e) Produktfarbe Schwarz, Grün, Rot Gewicht & Abmessungen Verpackungsbreite 22,5 cm Verpackungstiefe 6,5 cm Verpackungshöhe 15 cm Verpackungsinhalt Verpackungsart Box
Genuine Left or Right Arm Assembly Main Frame Boom RC Quadcopter Parts for DJI Inspire 1 V1.0 V2.0 PRODescription:Type: Drone AccessoryMaterial:PlasticColor:BlackSuitable for DJI Inspire 1Package Included:1X Drone Left or Right Arm(Optional)Tips:Left and right is determined from looking at the drone from the front.
Hauptmerkmale Funktionen Typ Aktion/Abenteuer Empfohlenes Alter (mind.) 5 Jahr(e) Empfohlenes Geschlecht Junge Produktfarbe Mehrfarben Sicherheitswarnung Nicht für Kinder von 0-3 Jahren Ja
