Visegrip 5WR Fast Release Curved Jaw Locking Pliers 125mm 5in

The RIDGID Strap Wrenches are best for any polished pipe. They have a sturdy, cast-iron housing with an I-beam handle and a strong, woven nylon strap that gives a tight grip. Two models available with special strap for plastic pipe.RIDGID No.2 Strap Wrench Handle Length: 300mm (11.3/4in).Strap Length: 760mm (30in).Strap Width: 30mm (1.1/8in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 135mm (5.1/2in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that strap can accommodate.

IRWIN Vise-Grip powerful locking action with jaws long enough to reach into tight spots with small enough tips to grip tiny objects. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Incorporates a wire cutter.Visegrip Irwin 9LNC Long Nose Locking Pliers Length: 225mm (9in).Capacity: 73mm (3in).

Palo telescópico plegable ultraligero portátil retráctil varilla plegable herramienta de protección de autodefensa al aire libre

Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.

The Stanley Cushion Grip Flared Tipped screwdrivers have a chrome plated bar which is corrosion resistant, and magnetic tips for easy pick up and screw locator. The soft-grip handle provides excellent torque and comfort. It has a smooth domed end for fast spinning action, speed and comfort, and the large diameter handle offers greater torque which is needed for driving wood screws. Screw tip identification is shown on the handle.Type - Flared Tip size 6.5mm Blade Length 150mm (6 in)

The Stabila BST-K Construction Tripods have a removable head that allows quick and easy mounting of the laser, simply remove and head and attach onto your laser before fastening the head onto the tripod. The lifting system with crank handle allows the height of the laser to be raised and locked off at a range of heights. The built-in air cushion lifting system allows the central column to descend gently, even if the user forgets to lock off the tripod. This prevents accidental damage to the laser. Each leg of the tripod can be adjusted individually and each spiked foot has rotatable rubber shoes, for scratch-free use indoors. Also fitted with a high quality chain spread stopper.The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.