Libre
Soutien
Clip-on Shark Gitarre Capo Clamp Zink-Legierung Silicon Pad für akustische E-Gitarren Bass Ukulele
Um unerwünschte Tonstörungen bei digitalen Tonübertragungen zu vermeiden ist es ratsam, das DAP FL09 110 Ohm Kabel zu verwenden (Digital AES-EBU Norm).
Features: 5 Watt all tube amp head with 2 rectifier modes(TUBE DIODES) and 8ohm/16ohm speaker output jacks, very powerful. Equipped with pre-amp tubes(1.5 * 12AX7/ECC83), power amp tubes (0.5 * 12AX7/ECC83 1 * 12BH7) and rectifier tube(1 * 6Z4). Single channel, with VOLUME, BASS, MIDDLE, TREBLE control knobs and BRIGHT/WARM tone toggle switch. German made W.I.M.A MKP capacitors, precision high frequency metal foil resistors. Compact size and full metal shell, portable and durable.
Features: 4-in-1 guitar effects pedal, distortion + overdrive + loop + delay. Distortion: a high gain distortion sound,2 modes to choose, with Gain, Tone, Pres and Vol control knobs. Gain--Adjusts the amount of distortion; Pres--Adjusts the high frequency; Vol--Adjusts the output level; Tone--Adjusts the EQ. Clockwise is brighter, counter clockwise is darker. Overdrive: Based on tube overdrive(ts9), with Drive, Tone and Level control knobs. Drive--Adjusts the amount of overdrive; Tone--Adjust the amount of treble in the sound; Level--Adjusts the output volume. FX Loop: The SEND and RETURN jacks allows you to expand your board with other pedals. The FX LOOP point is between the overdrive and delay modules. Delay: with Repeat, Delay and Level control knobs, 25ms-600ms adjustable delay time. Level-- Sets the level of delayed signal mixed with guitar tone, there is only guitar signal when fully CCW, and loudest delay when fully CW; Delay-- Adjusts the delay time from 25ms(fully CCW) to 600ms(fully CW); Repeat-- Adjusts the repeats of the delay signal, one repeat(fully CWW) and infinite feedback(fully CW)
Der dbx 1215 ist ein zweikanaliger 2/3-Oktav-EQ mit 45 mm Fadern auf 2 HE. Alle Bedienelemente auf der Frontplatte sind übersichtlich und logisch angeordnet. Der einstellbare Frequenzbereich ist gemäss ISO Standard von 25 Hz - 16 kHz. Die HF-gefilterten Ein- und Ausgänge sind parallel auf XLR, Klinke und Barrier-Strips jeweils symmetrisch ausgeführt. Mit dem Input-Gain Regler lässt sich der Eingangspegel um +/- 12 dB anpassen. Als Low-Cut wirkt ein Bessel-Filter mit 18 dB/Oktave bei 40 Hz, dieser ist schaltbar. Der Einstellbereich der Fader lässt sich von +/- 6 dB auf +/- 15 dB umschalten. Der Pegel am Ausgang wird mittels vier LEDs angezeigt. Eine Clip-LED signalisiert Übersteuerungen innerhalb des EQs. Die Signal-Masse ist mittels Jumper von der Gehäuse-Masse abtrennbar. Im Bypass, sowie im stromlosen Betrieb schalten Relais die Eingänge auf die Ausgänge. Technische Daten 40 Hz Low-Cut Filter pro Kanal mit 18 dB/Oktave (Bessel) Umschaltbare Bereiche +/- 6 dB und +/- 15 dB +/- 12 dB Eingangsverstärkung 45 mm Fader (25 Hz ? 16 kHz) XLR, Klinken und Barrier-Strips-Anschlüsse Internes Netzteil Symmetrische Ein- und Ausgänge (HF-gefiltert) Hardwired Bypass mit Relais 4 LEDs für Ausgangspegel Clip-LED Anzeige bei Übersteuerungen
21" Ukelele Bag Case Paper Pattern Oxford Backpack Adjustable Shoulder Strap Pocket 6mm Thicken Padded