Zandona Esatech Pro Rückenprotektor S

The Voyage Air Pant is the perfect choice for riders who demand mesh in humid conditions. Developed with KLIM®-proven durability, comfort, impact coverage and more intelligent features to make your next tour as comfortable as it can be. Features
Mesh construction for maximum ventilation Heavy abrasion and tear-resistant mil-spec derived Klim karbonite™ nylon mesh Built with klim rhino-stitch™ construction technology Ultra-ventilated mesh on back of knees Specially designed 420d/500d cordura® framework Breathable moisture-wicking internal mesh comfort liner Uv-resistant treatment on main mesh material Articulated fit Standard klim® jacket-to-pant zipper panel Low-profile elastic waistband adjustment One hand pocket on left side Over the boot cut with velcro adjustment impact protection D30® evo hip pads D30® evo knee pads [adjustable + hook & loop] Leather panels on inside lower leg Pittards® keratan leather knee overlays visibility Woven reflective fabric on back of legs

Features
Advanced Polycarbonate Composite Engineered Shell: Lightweight and tough. Fully-adjustable, aero-tuned visor: Reduces lift at high speeds. Ventilation System: Large intake manifolds and aero-tuned rear vents maximize airflow through the helmet. Large Eyeport: Fits all goggles and provides maximum visibility. Strap Grip: Keeps goggle strap in place. Padded Chin Strap with KwikWick™ material: Comfortable and secure. Closing chinstrap by double D ring.
AIRFIT Concept® Airfit™ permits a rider to personalize helmet fit through air adjustable cheek pads with additional noise reduction.Only by SCORPION EXO! KWIKWICK2® Liner Very effective, hypoallergenic, removable, machine washable, and very soft and pleasant to the touch, the KwikWick2® lining of the new ScorpionExo® 2011 range is a real custom-made slipper for your head.

strapazierfähiges Rindnappaleder anilin Innenhand aus Känguruleder Schoeller®-Keprotec®-Verstärkungen vorgekrümmte Finger Stretcheinsätze zwischen den Fingern und an den Seiten Sturzpads atmungsaktiv

To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.

Klinge, das innovative Jet-Modell hat eine Schale enthaltenen Dimension, beschichtet mit einer Sonderlackierung Metall, das eine materielle und taktile Wirkung, im Gegensatz zu den linearen und glänzend zentrale Grafik zeichnet sich durch das Logo gibt. Klinge ist für städtische Nachwuchsfahrer, die sind sehr aufmerksam, Mode und Trends und energiereiche Stil und Farbe, ohne Einbußen bei Qualität und Sicherheit zu suchen.TECHNISCHE MERKMALE Volle Jet ABS-Schale in zwei Größen Dunkle Sonnenblende Echte Naht mit technischen Grenze Innere Polsterung mit hoher Absorption Stoff Schwitzen und mesh Stoff net Kinnriemen mit mikrometrische Schnalle Abnehmbar und waschbar innere Polsterung

Equipment: Classic 5-pocket style without knee joint Customizable leg length Hip and knee protectors retrofit
Material: about 1.2 mm thick cowhide Lightweight lining
Upper: 100% leather
Lining: 100% polyester