Roof Desmo Flash Klapphelm Schwarz Weiss XS

The X-lite X-551 has become the X-lite X-551 "GT" (Gran Turismo). The use of latest generation fabrics for the new Touring Performance inner comfort padding and the redesigned configuration of the cheek pads have significantly improved comfort and fit. The look of the helmet has also been meticulously thought through.
Designed for riders of motard and street enduro motorbikes, but also ideal for dirt roads, the X-lite X-551 GT is available in three outer shell sizes and can be used in its full configuration or without the peak or the visor. It features a visor that is perfectly integrated with the design of the product, inner VPS (Vision Protection System) sunscreen and an efficient ventilation system.
The broad peak, designed for use on dirt roads, ensures adequate protection from the suns rays. Finally, the X-551 GT is equipped with a DD-ring retention system and is set up for the N-Com X-Series BX4 PLUS communication system.
Composite Fibre shell wind protector inner VPS sun visor, Fog Resistant Unitherm-Light inner lining Visor ready for Pinlock innovative ventilation system three different outer shell measurements for the six available sizes prepared for the n-com X-Series communication system Double D-Ring

* EN 17092 certified motorbike protective jacket * waterproof D-DRY laminated shell included * high tenacity mesh structure | Article: Dainese Sauris D-Dry Motorcycle Textile Jacket, black-brown, Size 50 | Article: Dainese Sauris D-Dry Motorcycle Textile Jacket, black-brown, Size 50, black-brown, Size 50

Features
Adjustable waist with Velcro and straps Button adjustments on biceps Cuff regulation with double zip and velcro Reflective silver inserts in the front, back and shoulder area 2 pockets in the waistline Certified protectors (EN 1621-1) for shoulders and elbows Reinforced back area Approved for back protector EN 1621-2/03 level 2 (separately sold)


Sizes S* M* L* XL* 2XL* 3XL*


chest width 91-95 95-99 99-105 105-111 111-117 117-123

waist width 87-91 91-95 95-101 101-105 105-111 111-117

arm s length 58-60 61-63 64-66 67-68 68-69 69-70
* all dimensions in cm

K1 is the AGV sport helmet for everyday riding challenges. Born from the AGV racing technology, ready for every road experience. The aerodynamic shape, racing-developed front air vents and wind-tunnel-tested spoiler maximize performances and give stability at higher speed. The anti-scratch visor with Pinlock® anti fog allows a wider vertical and lateral field of vision. Comfort is nocompromise with Dry-Comfort soft and removable interiors. Competition is a matter of facts. Shell
High Resistance Thermoplastic 2 shell sizes (XS-MS, ML-XXL) 4-density EPS developed in 4 sizes Collarbone safe profile
Ventilation
5 front vents 2 rear extractors Adjustable air vents
Aerodynamics
Integrated spoiler
Interiors
Dry-Comfort fabric Fit especially designed to allow wearing glasses All parts are easily removable and washable Removable nose guard Removable wind protector Ready for generic communication system
Visor
190° horizontal field of view Pinlock ready Anti-scratch Multistep visor mechanism Patented Extra Quick Release System Micro-opening system
Retention System
Double-D Ring
Weight
1500 g +/- 50 gr (in size MS)

Kuh und Känguru-Leder Leder-Perforationen im Frontbereich, den Armen und den Beinen Zweilagig an den äußeren Oberschenkeln und am Gesäß Außenprotektoren an Ellbogen, Schulter und Knien. Stretch mit Faser-Verstärkung im hinteren Schulterbereich und Lendenwirbelbereich Vorgeformter Brustbereich, Beine, Schulter und Ärmel. Herausnehmbares Polyesterfutter mit hochdichtem, stoßdämpfendem Schaumstoff Hochfeste Nähte. Ausgestattet mit Slidern

MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
OUTER SHELL in tricarboco material, mix of Kevlar, carbon and fibre, joint through resin hand made using new technologies, which foresee aramidic resins. 2 different shell sizes: XS-L and XL-2XL
INTERNAL POLYSTYRENE protective lining, available in three sizes (S, M and L). The special shape and construction in different density increases mechanical resistance in the event of accidental shock. Inner channels studied in the wind tunnel guarantee a perfect ventilation.
The D-RING RETENTION SYSTEM has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
MRJUMP is homologated as per the following rules: ECE 22-05, DOT, JIS, INMETRO NBR 7471
CHEEK PADS completely removable and washable, with different thickness to get a perfect customization od the helmet.
INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part.
INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA. The SHELL is in polystyrene with channels for air flows. In the front part there are upper and back air ventilations, which help the internal helmet ventilation. On the CHIN GUARD there is an air ventilation for the front ventilation.
The OUTER SHELL has ribs to channel better the air flows. The PEAK has an aereodynamic impact. The wide open space in the front allows the use of any kind of glasses.
weigth: ca. 1000gr