ForgeFix FORLB825M M8 x 25 Masonry Anchor Bolt Loose ZYP Bag 10

Thompson's 10 Year Roof Seal is a high performance coating which cures to form a durable, flexible membrane suitable for resealing and protecting whole roofs or repairing large areas of damage to a variety of roofing materials. The 10 year formulation is designed to flex with the natural movement of the roof protecting the membrane from cracking and splitting over time. UV light stable iron oxide pigments provide a protective shield against harmful UV radiation ensuring 10 year weatherproofing performance under extreme conditions. For best results the advanced formula should be applied directly to dry surfaces, the 10 year formulation forms a vapour permeable membrane that repairs and weatherproofs whilst allowing any trapped moisture in the substrate to escape. This product is supplied in a tin with re-sealable lid and the following specifications:Colour: Black.Available Sizes: 1L, 2.5L or 4L.The Thompsons RSLHPRS1L Roof Seal Black comes in the following:Size: 1 Litre.

Flexovit Waterproof Sanding Sheets can be used wet or dry and is a highly flexible high quality Silicon carbide abrasive. Waterproof paper is specially treated making it ideal for use with water or other lubricants. The paper lasts longer and gives a smoother finish when used wet as the water cleans, lubricates and helps prevent clogging. Size: 230 x 280mm.Packed in 3s

Type:Hand Shower; Style:Contemporary; Finish:Electroplated; Shower Width:6.5; Shower Length:22; Number of Settings:1; Spray Function:JetRainfall; Shower Hose Included:No; Slide Bar Included:No; LED Color:Blue,Green,Red; Installation Type:Wall Mounted; LED turns Blue between:32-43; LED turns Green between:0-31; LED turns Red between:50; LED begins flashing between:5-31; Shower Arm Included:No; Material:ABSPC; Features:Color Gradient,LED,Shower; Net Weight:0.000; Listing Date:05/16/2019

Nail punches are designed to drive nail heads below the surface of the wood. Square head provides a large striking area which also stops the punch from rolling off the bench. Knurled body with hardened, slightly cupped head.Size. 1/16 in.Length 4 in

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 6XAdjustment . 120 - 150mmAdjustment. 4.3/4 - 5.7/8in

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28° Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S