The SCOTT 550 Stripes Helmet comes with a new design and is a high end helmet that pushes the limits of ventilation and safety. Equipped with the latest safety technologies such as MIPS® and Conehead and the perfect cooling management with strategically placed vents you will feel good and safe throughout your entire ride. Materials In-Mold Technology Features Optimized & customisable ventilation 3D shaped foam Removable and washable liner & cheek pads CONEHEAD⢠CONEHEAD⢠is a revolutionary method of molding EPS foam to increase the impact properties of helmets. The helmet is molded in two stages and features two parts in two different densities, with a unique conical interface. How Conehead TechnologyTM works ? There are two different densities of foam as well as two different foams with their own characteristics of recovery from impact and inter-foam bond strength. In a crash, the impact force pushing towards the head causes the cones to compress which creates lateral forces spreading sideways through the higher density outer foam layer. Impact energy/force is absorbed by this lateral motion. At the same time, the head is travelling in the opposite direction, compressing the base of the lower density cones and slowing the accelerating head. The result is lower G-force experience for your head. The benefit: a lighter helmet + softer protective shock absorbing foam closer to your head. Mips If you are seeking the best protection that money can buy then look no further. Scott helmets with integrated MIPS® brain protection system offer a whole new dimension in safety. No matter where or how you ride, choose a SCOTT helmet and Elevate Your Safety! Testing and results : taking a fall with a SCOTT MIPS® equipped helmet is very different.
A traditional helmet A helmet equipped with MIPS
Helmets are designed and optimized for straight impacts. They do not consider angled impacts. In an angled impact rotational violence is transferred to the head and the brain. MIPS is a low friction layer inside the helmet which allows the head to rotate relative to the helmet in an angled impact. This substantially reduces rotational violence and the potential for damage to the brain.
Rotational violence with a traditional helmet Rotational violence using a helmet with MIPS
How People Fall? Conventional helmets are tested by dropping them vertically onto a solid surface. They are designed to protect you from straight / radial impacts. For over 15 years, MIPS has researched how people crash in the real world. Collaborating with some of the world s leading neurosurgeons and experts, MIPS® has established that when you fall, your head most often hits the ground at an angle, creating a rotational shock to the brain. This rotational shock can cause strain in your brain. A helmet with MIPS® absorbs much of that rotational energy, offering you better protection. And if, against all the odds, you do fall vertically onto your head, a SCOTT helmet with MIPS® will protect you just as well as an ordinary helmet. MIPS imitated the brain s own protection system he Brain is suspended in a low friction cerebrospinal fluid which allows your brain to slide within your skull to protect the brain under impact. MIPS® Brain Protection System is a unique technology intended to protect your brain against angled impacts by imitating the brains natural low friction, barrier, thereby reducing the shock transmitted to your brain. Under angled impact the helmet slides on the MIPS® low friction layer minimizing the rotational violence transfered to the brain.
Safety Prepared for back protector Lev. 1 Warrior Protectors EN 1621-1 Level 1 on shoulders and ellbows Comfort 50% waterproof garment prepared for thermo lining L30 prepared for H2Out lining X47 elastic knitted cuff Performance Step-in Clothing: layered clothing system optional Materials sheep leather, 0.7/0.9 mm thick, extra comfort leather Maintenance Do not Wash Do not bleach Do not tumble dry Line drying in the shade Do not iron Do not dry clean Do not wring
Description:Brand new electric heated grips handlebar.Fit for ATVs with thumb throttles; will not work with twist grip throttles.Easy to install.Specification:Color: BlackPower: 12w-24w (Adjustable)Red Line:DC+12 cathodesBlack Line:DC -12 anodeLength:128mmFitment:Fit for ATVs with thumb throttles; will not work with twist grip throttlesInstallation Instruction:1. Tear Down the Primitive Handlebar and Load the Electric One2. As for Electric Power Line,Red Line Connect the Positive,Black Line,the NegativeCant meet, Otherwise Temperature Cannot Adjust3. Before Opening and Closing,Push it to Increase the Temperature.Retreat is toReduce the Temperature,Back End to off.Note:1.When loading the left handlebar to the motorcycle ,qualify position and perpendicularto the ground.2.Balance ,please take it as well as balancing the installing position,fasten silk dontsqueeze his hand .as the balance of iron can not adjust the installing position, in thebalance of iron can not adjust the installing position ,in the banlance with the ironhand between the washers of and excessive press hand ,will cause damage the abnormal.Package Included:1 X Electric Heated Grips Handlebar