Libre
Soutien
Specification:Product Name: 3 GAL Air Horn Tank Compressor KitCondition: NewPackage Size: 60cm x 35cm x 25cm (LxWxH)Quantity: 1 setAir Compressor:Color: SilverMaterial: MetalSize: 24cm x 16cm (LxH)Voltage: 12VAmperage Draw: 23APlacement On Vehicle: Front,Left, Right200 PSI Air Compressor12V Permanent Magnetic MotorMaximum Working Pressure: 200 PSIWorking Pressure: 150 PSIFlow Rate: 1.7CFM @ 0 PSI4-Trumpet Air Horn:Color: BlackMaterial: MetalDecibel: 149DBVoltage: 12VPlacement on vehicle: Front,Left,RightTrumpet Size: 15cm x 34cm (LxH)Air Tank:Color: Black3 Gallon Air Tank KitCapacity: 3 Gallon (12 Liter)Maximum Working Pressure: 200 PSIWorking Pressure: 150 PSITotal Ports: 7Size: 55cm x 23cm (LxH)Features:1.Anti-Corrosion Coating,Precision Welded.2.This on-board system is designed for use with any high-pressure air horn that requires an on-board air system.3.Comes with a 3 Gallon air tank with 7 ports, a 200 PSI heavy duty compressor, pressure gauge, pressure switch, fuse, hose, fittings, thread sealant and mounting hardware.4.Oil-less design,moisture and Dust Resistant.5.Automatic reset thermal overload protector,mounting plates with vibration isolators.Fitment:Fit for all vehicles with a 12V system.Package Included:1 x Air Tank1 x Air Pressure Gauge1 x Pressure Switch1 x Safety Valve1 x Wing Style Drain Valve5 x Hex Head Male Plug1 x OD Nylon Plastic Hose1 x Fuse1 x Thread Sealant Tape1 x Rubber Ring4 x Screws(Big)4 x Screws (Small)2 x Screws (Minimum)4 x Nut (Big)4 x Nut (
Specification:Color: SilverWatt: 3000WMaterial: AluminumPump Lift: Above 90cmVoltage: 220-240V 50HzSize: 23 x 10 x 7 cm / 9.06 x 3.94 x 2.76 inch (appr.)Plug: EU (we will send you the suitable adapter according to your location)Features:● Extend the life of the engine.● Easy to install, saves time and effort.● Eliminating the difficult start after the winter parking troubles.● Reduce the cost of fuel consumption and winter warm library.● Applicable to all kinds of gasoline vehicles and diesels vehicles.Package Included:1 X User Manual1 X Engine Heater1 X Accessories KitAny questions, please contact us for solution. Hope a nice day!Notice:- Please allow slight dimension difference due to manual measurement.- Please consider the actual sizes in the listing as the pictures are generally enlarged to show detail.- There might be a little color difference due to the monitor, camera or other factors, please refer to the physical item.- Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
Historic shapes and colors meet modern design. The Legends helmets immortalize riders and achievements that will never be forgotten. Comfort, protection and ventilation are key elements of these helmets that meet today’s highest standards. The X3000 carries Agostini’s signature and includes the contoured chin piece just as he liked it so that he could lean right up against the gas tank. It also features a dual button visor that can be opened with the left hand alone. The iconic piece that gave birth to the AGV logo: the tricolor Agostini helmet, seen from behind, just as his rivals saw it. Same shape, same color scheme, the same leather bag used to transport it, modern technology. Timeless allure in just 3000 limited pieces. Features
Shell in Fiberglass engineered in 3 sizes, EPS structure developed in 3 sizes Visor on-off air vent with channels hollowed in the shell Premium interiors with Genuine leather, Suede fabric and Embroidered logo Fully removable and washable interiors (neck roll excluded) Anti-scratch visor with micro-opening system Double D retention system
Description:100% brand new.Easy to install.Better than the original wiper.More strong and more fit for your car rear windscreen.Dont hesitate to buy it.Part Number: SSB 000150 / SSB000150Rear windscreen wiper armblade for Citroen Xsara Picasso X Y 03 53 51 02 52.Specification:Material:High quality plasticColor:Black brand newSize:Wiper arm: 42.5 x 3.8 x 2.8cmBlade: 41.8 x 3.7 x 1.6cmAperture: 8~9.5mmWeight(Kg):0.25Color:BlackFitment:2001--2005 MG MG ZT Saloon1999--2005 Rover 75 RJ Saloon /EstatePackage Included:1 x Rear Wiper ArmBlade Set
To have a maximum safety the helmet must fit tightly and be correctly and securely fastened, in order not to be able to be taken off neither by pulling it nor by rotating it around the head. If it is too big, it may slide down over the eyes or turn in a lateral direction due to movement during riding, blocking the right visibility. Safety Shell in three sizes (M, L and XL) hand made. The new material is a mix of carbon and aramidic fabric.
Internal Polystyrene in three sizes (M, L and XL). The special shape and construction in different density increases mechanical resistance in the event of accidental shock.
Shield thermoformed froma flat sheet. Each shield is a one-of-a-kind piece with unequalled optical features and mechanical resistance. Thanks to this process, the face shield is anti scratch and anti fog and there is no need to use additional lenses on the visor.
The D-Ring Retention System has been designed and patented by Suomy. Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test. If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab. The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs. To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding. ECE 22-05 Comfort Cheekpads completely removable and washable, in different thicknesses for a complete customization of the product. Internal Shell completely removable and washable, in different thicknesses for a complete customization of the product. The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in teh internal part of teh helmet and to let off the hot air through the back part.
Inner (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
Wicks sweat away from the body. Keeps the user fresh, dry and comfortable. Lightweight, soft and breathable fabric. Performance verified and certified by ADVANSA.
Removeable Nose Protector Ventilation
The Shell is a polystyrene with channels for inside air flows. In the front part there is a Air Ventilation with on/off system, which gets the internal helmet ventilation. On the chin part there is an adjustable Air Ventilation.
Aerodynamics Spoiler and Back Air Ventilation: produced in polycarbonate , it has been studied and tested in wind tunnel, so that the point of detachment of the aerodynamic flow is shifted as far away as possible from the shell. This results in less turbulence and therefore fewer vibrations on the helmet itself. This helmet comes standard with a clear visor.