The Facom JET.C4M4 Tool Chest 4 Drawer is a tough, durable storage system, featuring a large amount of storage space and protection. The chest can be stacked on a rolling chest of same dimension, and is supplied with a linking kit for easy and secured fitting of the unit. The Tool Chest has the following drawers, each able to hold 4 modules: 3 x 60mm high drawers and 1 x 130mm high drawer. Specification Capacity: 16 Modules. Total Load: 105kg.Storage Volume: 100 litres.Weight: 51.5kg. Overall Dimensions: 96.4 x 54.6 x 48cm.Effective Drawer Dimensions: 56.9 x 42.1 x 60-130mm.
These Forgefix Clout Nails have a large head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or similar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Galvanised 40mm Bag Weight 500g
The Sievert Cyclone Torch Kit fitted with a cyclone burner for rapid pipe soldering and brazing. Fits all standard propane cylinders and is suitable for plumbing and engineering applications. Contains the following: 1 x 3486 Handle.1 x 3524 Cyclone Burner.1 x Hose Failure Valve.1 x 4 Metres of LPG Hose.
SB-3753N series centre punches made from vanadium steel with a hexagonal shank. Fully polished steel surfaces and a brilliant chrome finish.Size: 2mm (5/64 in).Length: 100mm (4 in)
Self guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm
The Knipex 86 03 Series plier wrench with dipped PVC handles and smooth parallel jaws for cautious installation of plated fittings or sensitive surfaces. More effective, faster and greater capacity than an adjustable spanner of the same size. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power 86 03 125: 11 Adjustments, Capacity: 23mm.86 03 150: 14 Adjustments, Capacity: 27mm. 86 03 180: 13 Adjustments, Capacity: 35mm.86 03 250: 17 Adjustments, Capacity: 46mm.86 03 300: 22 Adjustments, Capacity: 60mm.Length 180mm (7 in).Capacity 35mm (1. 3/8 inch)
